Manual Siemens VS08G1266 (page 9 of 77) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

76708

Zoom out

Zoom in

1/77

dede en

Please keep this instruction manual.

When passing the vacuum cleaner on to a

third party, please also pass on this

instruction manual.

Intended use

This vacuum cleaner is intended for

domestic use only, and is not intended for

commercial use.

Only use this vacuum cleaner in accordance

with the instructions in this instruction

manual.

The manufacturer will not accept any

responsibility for damage caused by

improper use or incorrect operation.

Therefore, please note the following points.

The vacuum cleaner must only be operated

using:

Ⅲ

Manufacturer’s original MEGAfilt

SuperTEX

dust bags

Ⅲ

Manufacturerês own replacement parts,

accessories or -optional accessories

The vacuum cleaner is not to be used for:

Ⅲ

vacuuming persons or animals

Ⅲ

vacuuming up:

– Insects and spiders

– Hazardous, sharp-edged, hot or burning

substances.

– Damp or liquid substances.

– Highly flammable or explosive

substances and gases.

Safety information

This vacuum cleaner complies with the

recognised rules of technology and the

relevant safety regulations.

We confirm compliance with the following

European directives: 89/336/EEC (amended

by Directives 91/263/EEC, 92/31/EEC and

93/68/EEC). 73/23/EEC (amended by

Directive 93/68/EEC).

Ⅲ

Always observe the information on the

rating plate when using the vacuum cleaner

and connecting to the power supply.

Ⅲ

Never use the vacuum cleaner without a

MEGAfilt

SuperTEX dust bag fitted.

=> This can damage the vacuum cleaner.

Ⅲ

Only allow children to use the vacuum

cleaner under supervision.

Ⅲ

Keep the vacuum cleaner away from the

face when using nozzles and tubes.

=> Risk of injury.

Ⅲ

Never carry the vacuum cleaner by the

power cord.

Ⅲ

Fully extend the power cord when using

the vacuum cleaner continuously for

several hours.

Ⅲ

When disconnecting the appliance from the

mains, pull the plug, not the power cord.

Ⅲ

Do not pull the power cord around sharp

corners or allow it to become trapped.

Ⅲ

Unplug the power cord from the mains

before carrying out any work on the

vacuum cleaner or its accessories.

Ⅲ

Do not use the vacuum cleaner if it is

damaged. Unplug the power cord from the

mains if a fault is detected.

Ⅲ

For safety reasons, only authorised after-

sales service personnel are permitted to

carry out repairs and fit replacement parts

to the vacuum cleaner.

Ⅲ

The vacuum cleaner should be protected

from moisture and sources of heat.

Ⅲ

Switch off the vacuum cleaner when it is

not in use.

Ⅲ

At the end of its life, the vacuum cleaner

should be disposed of in an appropriate

manner.

Ⅲ

For safety, the vacuum cleaner is fitted with

a temperature safety switch, which

automatically switches the vacuum cleaner

off if it is blocked and overheating. Unplug

the power cord from the mains and make

sure that the nozzle, tube and hose are not

blocked. Also check whether the filter

needs changing.

Having cleared the blockage, leave the

vacuum cleaner to cool down for at least

one hour. It can then be switched back on

again.

enYour vacuum cleaner en

1 Handle

2 Accessories holder

3 Combination tool

4 Flexible hose

5 ON/OFF button

6 Power on indicator*

7 Dust bag change indicator

8 Exhaust filter*

9 Parking aid (automatic switch off*)

10 Carrier for exhaust filter

11 Suction regulation button

12 Locking tab

13 Exhaust filter cover

14 Power cord

MEGAfilt

Super TEX dust bag

16 Filter bracket

17 Motor protection filter

18 Storage aid (on underside of unit)

19 Adjustable floor nozzle

20 Carpet lifter*

21 Adjustable floor tool* with locking collar

22 Locking lever

23 Dust compartment cover

24 Telescopic tube with adjusting button

25 Telescopic tube with adjusting sleeve

26 Telescopic tube with adjusting sleeve

and locking collar*

Depending on equipment

31 2

1716

24*

25*

26*

21*

20*

19*

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Siemens VS08G1266 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Siemens VS08G1266 Manual

Product: