710206
30
Zoom out
Zoom in
Previous page
1/216
Next page
en Cleaning and maintenance
30
8. Fit the components and insert the
milk container.
→Fig. 19
9. If there is a water filter, remove it.
10.Press ⁠.
11.Empty the water tank and fill with
lukewarm water up to the "0.5l calc"
mark.
12.Dissolve one Siemens descaling tab-
let in the water tank and press ⁠.
13.Place a container with a capacity of
1l under the outlet system and
press ⁠.
aThe descaling programme will run
for approx.20minutes.
14.If "Refill descaler." is shown on the
display, add more descaling solution
and press ⁠.
15.Rinse the water tank.
16.Press ⁠.
17.If there is a water filter, insert the wa-
ter filter.
→"Insert water filter", Page22
18.Press ⁠.
19.Fill the tank with fresh water up to
the "max" mark.
20.Press ⁠.
aThe descaling programme takes ap-
prox.1minute and rinses the appli-
ance.
21.Empty and insert the drip tray.
22.Remove and empty the milk con-
tainer.
23.Clean the milk container, milk tube
and suction pipe.
24.Fit the components and insert the
milk container.
→Fig. 19
aThe program has ended and the ap-
pliance is ready for operation.
Using the cleaning programme
Run the cleaning programme when
your appliance prompts you. The pro-
cess takes approx.9minutes.
Requirement:The brewing unit is
cleaned.
→"Cleaning brewing unit", Page27
1. Press ⁠.
2. Use and to select "Cleaning
and care" and press ⁠.
3. Use and to select "Clean"
and press ⁠.
4. To start the programme, press ⁠.
aThe display will guide you through
theprogramme.
5. Empty and insert the drip tray.
6. Open the ground coffee compart-
ment.
7. Place one Siemens cleaning tablet
into the ground coffee compartment.
8. Close the ground coffee compart-
ment and press ⁠.
9. Place a container with a capacity of
1l under the outlet system and
press ⁠.
aThe cleaning programme takes ap-
prox. 7minutes.
10.Empty and insert the drip tray.
aThe program has ended and the ap-
pliance is ready for operation.
Using calc'nClean
You can combine the cleaning and de-
scaling programmes using the
calc'nClean service programme. Run
the calc'nClean programme when your
appliance prompts you. The process
takes approx.43minutes.
Requirement:The brewing unit is
cleaned.
→"Cleaning brewing unit", Page27
1. Press ⁠.
2. Use and to select "Cleaning
and care" and press ⁠.
3. Use and to select
"calc'nClean" and press ⁠.
4. To start the programme, press ⁠.
aThe display will guide you through
theprogramme.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens TQ507R03 - EQ.500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens TQ507R03 - EQ.500 in the language / languages: Dutch, Polish as an attachment in your email.

The manual is 15.53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens TQ507R03 - EQ.500

Siemens TQ507R03 - EQ.500 User Manual - German - 260 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info