710206
29
Zoom out
Zoom in
Previous page
1/216
Next page
Cleaning and maintenance en
29
¡If you accidentally interrupt the ser-
vice programme, you must reset it.
→"Resetting a service programme",
Page29
Tips
¡If you use a water filter, this prolongs
the time interval until a service pro-
grammes needs to be performed.
¡You can combine the cleaning and
descaling programmes using the
calc'nClean service programme.
→"Using calc'nClean", Page30
¡Clean your appliance with a soft,
damp cloth immediately after a ser-
vice programme to remove any de-
scaling solution residues and pre-
vent corrosion.
Resetting a service programme
Take the following steps if the service
programme is interrupted, e.g. due to a
power failure.
1. Rinse out the water tank.
2. Fill the water tank with fresh, non-
carbonated water up to the "max"
marking.
3. Press ⁠.
aThe appliance will rinse itself for ap-
prox.2minutes.
4. Empty and clean the drip tray.
5. Insert the drip tray and close the
door.
6. Restart the service programme.
Using the milk system cleaning
programme
Rinse the milk system with water, if ne-
cessary. The rinsing process takes ap-
prox. 1minute.
Requirement:The brewing unit is
cleaned.
→"Cleaning brewing unit", Page27
1. Press ⁠.
2. Use and to select "Cleaning
and care" and press ⁠.
3. Use and to select "Milk sys-
tem" and press ⁠.
4. To start the programme, press ⁠.
aThe display will guide you through
theprogramme.
5. Remove and empty the milk con-
tainer.
6. Clean the milk container, milk tube
and suction pipe.
7. Fit the components and insert the
milk container.
→Fig. 19
8. Place an empty glass under the out-
let system and press ⁠.
The milk system will now clean itself
automatically.
aThe program has ended and the ap-
pliance is ready for operation.
Tip:If you want to clean the milk sys-
tem particularly thoroughly, clean regu-
larly by hand.
→"Cleaning the milk system", Page27
Using the descaling programme
Run the descaling programme when
your appliance prompts you. The pro-
cess takes approx.30minutes.
Requirement:The brewing unit is
cleaned.
→"Cleaning brewing unit", Page27
1. Press ⁠.
2. Use and to select "Cleaning
and care" and press ⁠.
3. Use and to select "Descale"
and press ⁠.
4. To start the programme, press ⁠.
aThe display will guide you through
theprogramme.
5. Empty and insert the drip tray.
6. Remove and empty the milk con-
tainer.
7. Clean the milk container, milk tube
and suction pipe.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens TQ507R03 - EQ.500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens TQ507R03 - EQ.500 in the language / languages: Dutch, Polish as an attachment in your email.

The manual is 15.53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens TQ507R03 - EQ.500

Siemens TQ507R03 - EQ.500 User Manual - German - 260 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info