111260

Siemens TK 911 N2 FR Manual

21
Zoom out
Zoom in
Previous page
1/108
Next page
17
If hot water is required immediately after
drawing off steam, fi rst cool the appliance
by pressing button
g
(hot water), the
appliance gives off steam into the drip tray
12
.
Frothing or warming milk
!
Danger of scalding
The steam is very hot. Only grasp the
frothing attachment by the plastic part.
Always use suffi cient milk, otherwise the
steam produced may result in sudden
spluttering.
● Firmly slide together the frothing
attachment
9
(Fig.
4
). There must be no
gaps between the individual components.
● Push the frothing attachment
9
fi rmly onto
the adapter
8
on the steam pipe
7
(Fig.
5
).
● Dip the tube into the vessel containing the
milk.
● Set the selector on the frothing
attachment
9
to
c
(frothed milk) or
C
(hot
milk) as desired (Fig.
5
).
● Place a cup or a glass under the nozzle
of the frothing attachment
9
.
● Press the steam button
h
.
● As soon as
Steam
and
ready
fl ash
alternately in the display, press the steam
button
h
once more. The milk is drawn
into the appliance, heated, and, if
c
(frothed milk) is selected, frothed.
● To end the process, press the steam
button
h
. The appliance will briefl y emit
steam.
The appliance will be ready to provide
steam for around minutes.
Ready
will then
reappear in the display.
Tip
: You can use the selector on the
frothing attachment
9
to vary the milk froth
and the temperature by gently rotating it
between
C
and
c
. The
C
(cooler) to
c
(hotter) settings regulate the temperature of
the steam (Fig.
5
).
You should preferably use cold milk with a
fat content of 1.5 %.
Info
: Clean the frothing attachment
9
immediately after it has cooled down by
rinsing it with water. Dried residues are
diffi cult to remove.
See section “Care and daily cleaning”.
Preparing cappuccino and
latte macchiato
!
Danger of scalding
The steam is very hot. Only grasp the
frothing attachment by the plastic part.
Always use suffi cient milk, otherwise the
steam produced may result in sudden
spluttering.
With this appliance, preparing excellent
cappuccino or latte macchiato is simplicity
itself.
To prepare cappuccino
● Push the frothing attachment
9
onto
the adapter
8
and set the selector to
c
(frothed milk).
● Dip the tube into a vessel containing milk.
● Position a large cup under the coffee
dispenser
14
, and direct the nozzle of the
frothing attachment
9
into the cup.
● Place the
Nespresso
-capsule on the
lit balcony
16
, with the membrane
downwards (Fig.
2
).
● Press the button
c
(cappuccino).
After a short time, an optimum mix of
frothed milk and coffee will automatically
fl ow into the cup.
Info
: You can halt the dispensing of milk or
coffee respectively at any time by pressing
the button
c
(Cappuccino) or
d
(latte
macchiato).
To prepare latte macchiato
● Push the frothing attachment
9
onto
the adapter
8
and set the selector to
c
(frothed milk).
en
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens TK 911 N2 FR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens TK 911 N2 FR in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info