111260

Siemens TK 911 N2 FR Manual

20
Zoom out
Zoom in
Previous page
1/108
Next page
16
en
Water hardness
The preset water hardness is 3.
To determine the hardness of the water in
the area, use the test strips provided, or
make inquiries with the local water utility.
To change the water hardness setting,
consult the section “Changing basic
settings”.
Power save
The appliance automatically switches to
economy mode if it is not used for an hour.
The display shows
Power save
.
This function can be activated and de-
activated as desired via the basic settings.
Info
: The warming plate
3
is not switched
off in economy mode.
Every time the cold appliance is switched
on,
Rinsing
appears in the display.
The appliance is rinsed automatically. If
Manual
has been selected in the basic
settings,
Launch rinsing cycle
will
appear in the display.
Check that all drip trays are in place, and
then press the button
f
(large cup). The
appliance is rinsed.
Preparing coffee
Tip
: For really successful espresso coffee,
preheat the cups on the warming plate
3
, or
fi ll the cups with hot water and empty out.
The appliance must be switched on, and
Ready
showing in the display. If window
2
is closed, move your hand in front of the
window to open it (Fig. 2).
● Place a
Nespresso
capsule on the
lit balcony
16
, with the membrane
downwards (Fig.
2
).
● Place a preheated cup under the coffee
dispenser
14
.
● Depending on the cup size required,
press button
e
(small cup) or button
f
(large cup). The cup is fi lled. The coffee
dispenser automatically cuts off as soon
as the programmed quantity has been
served.
Ready
appears in the display.
Info
: After use, the capsule is automatically
ejected into the capsule container
13
.
Info
: Approx. 2 min. after the brewing
process has fi nished, the window closes
automatically. The appliance is equipped
with a sensor which automatically opens the
window in response to a hand movement.
To stop the fl ow of coffee prematurely
● Press button
e
(small cup) or button
f
(large cup) once again.
To change the quantity of liquid
permanently
The preset quantity for a small and large
cup respectively can be altered.
● Keep the button
e
(small cup) or button
f
(large cup) depressed until the desired
quantity of coffee has been served.
During this time, the text in the display will
fl ash.
Info
: The quantity can be changed at any
time.
Additional quantity of liquid
● Press button
e
(small cup) or button
f
(large cup) again, within four seconds of
the fl ow of coffee stopping.
The same quantity of water again will be
passed through the capsule.
To prepare coffee or obtain water
immediately after drawing off steam
If immediately after drawing off steam,
coffee is dispensed by pressing the button
e
(small cup) or button
f
(large cup), the
appliance initially cools off automatically.
The appliance fi rst gives off steam at
intervals, then coffee fl ows from the coffee
dispenser
14
.
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens TK 911 N2 FR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens TK 911 N2 FR in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info