Manual Siemens TI9555X1DE - EQ.9 plus S500 (page 74 of 164) (German, Italian)

711561

Zoom out

Zoom in

1/164

en Service programmes

. Service programmes

Se r v i c e pr ogr ammes

Every so often – the exact frequency

depends on usage and water hardness

– one of the following messages will

appear in the display in place of the

coffee selection:

■ Rinse milk system

■ Run descaling program urgently!

■ Run cleaning program urgently!

■ Run calc'nClean program urgently!

The appliance should immediately be

cleaned or descaled using the

appropriate programme. Alternatively,

the two processes Descale and Clean

can be carried out together using the

calc’nClean function. Failure to carry out

the service programme according to the

instructions may damage the appliance.

You can also start the service

programmes at any time without having

to wait for a reminder to appear in the

display. Press the $/± button, select the

desired programme and run it.

Notes

■ Important: If descaling is not

performed on the appliance in good

time, the following appears

"Descaling programme overdue.

Device will shortly be locked!".

Immediately perform the descaling

process in accordance with the

instructions. If the appliance is

locked, it can only be operated

again once descaling has been

carried out.

■ Caution! For each of the service

programmes, use descaling and

cleaning agents as described in the

instructions and observe the

(relevant) safety information.

■ Do not drink the liquids.

■ Never use citric acid, vinegar or any

vinegar-based agents to descale the

appliance.

■ For cleaning and descaling, only use

the tablets intended for such

purpose.They have been specially

developed for this appliance, and

new stocks can be ordered through

customer service. ~ "Accessories"

on page 50

■ Never insert descaling tablets or

other products into the grounds

compartment.

■ Never interrupt the service

programme.

■ Prior to starting a service

programme, remove, clean and

re-insert the brewing unit. Rinse the

milk system.

■ At the end of a service programme,

wipe down the appliance using a

soft, damp cloth to immediately

remove any descaler residue. This

residue may cause corrosion.

■ New sponge cloths may contain

salts. Salts can cause rust film on

stainless steel, so cloths must

always be washed out thoroughly

before use.

■ Using a water filter increases the

intervals until a service programme

needs to be performed.

■ If one of the service programmes is

interrupted, e.g. by a power failure,

proceed as follows:

The appliance automatically starts a

special rinsing process.

1. Rinse out the water tank.

2. Pour in fresh, still water up to the

"max" marking and confirm.

The programme starts and rinses the

appliance.Duration: approx.

2 minutes.

3. Empty, clean and re-insert the drip

tray.

4. Empty, clean and re-insert the milk

container.

The programme has finished. The

appliance is ready for use again.

5. Press $/± button to close the

programme.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Siemens TI9555X1DE - EQ.9 plus S500 in the language / languages: German, Italian as an attachment in your email.

The manual is 6 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens TI9555X1DE - EQ.9 plus S500

Siemens TI9555X1DE - EQ.9 plus S500 User Manual - English, Dutch, French, Polish - 236 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Siemens TI9555X1DE - EQ.9 plus S500 Manual

Product: