en Daily care and cleaning
72
Cleaning the appliance
1. Wipe down the outside of the
appliance with a soft, damp cloth.
2. Clean the display using a micro-fibre
cloth.
3. Any grounds residue in the powder
compartment should be pushed
down using a soft brush.
Notes
■ If the appliance is cold when
switched on or if it is switched off
after dispensing coffee, it rinses
automatically.The system is therefore
self-cleaning.
■ If the appliance has not been used
for a prolonged period of time (e.g.
while you are on holiday), clean the
entire appliance thoroughly,
including the coffee outlet, water
tank, milk system, brewing unit and
trays.
Cleaning the drip tray and coffee
grounds container
~ Fig. %
Note: The drip tray and coffee grounds
container should be emptied and
cleaned every day in order to prevent
deposits.
1. Pull the drip tray with the coffee
grounds container forwards and out.
2. Remove the drip plate and clean
with a brush.
3. Empty and clean the drip tray and
coffee grounds container.
4. Wipe out the interior of the appliance
(intake trays).
Cleaning the milk container
~ Fig. '
Note: For reasons of hygiene, the milk
container must be cleaned regularly
1. Dismantle the milk container into its
individual parts.
2. Clean all parts of the milk container
or put them in the dishwasher.
Cleaning the milk system
The milk system is automatically
cleaned with a short jet of steam directly
after preparing a milk drink.
:Warning
Risk of burns!
The outlet system becomes very hot.
After use, always let the outlet system
cool down before you touch it.
Manually clean the milk system on a
weekly basis or more frequently if
required.For particularly thorough
cleaning, the milk system can be
additionally rinsed with water. ~ "Rinse
milk system" on page 75
Removing the milk system ~ Fig.#:
1. Remove the milk container from the
appliance.
2. Slide the outlet system to the bottom
position.
3. Press the unlocking mechanism at
the top right.
4. Fold the cover down towards the
front and remove.
5. Remove the milk system and
dismantle into individual parts.
6. Clean the individual parts with
detergent solution and a soft cloth
~ Fig. &.
7. Rinse all parts with clean water and
leave to dry.
