528377
30
Zoom out
Zoom in
Previous page
1/88
Next page
30
deen
Water  lter
A water  lter can prevent scale buildup.
Before a new water  lter is used, it must be
rinsed. To do this, proceed as follows:
1. Press the water  lter  rmly into the wa
ter tank with the aid of the measuring
spoon (19).
2. Fill the water tank (17) with water up to
the max mark.
3. Press and hold the e off / j button (13)
for at least three seconds. The menu
opens.
4. Press the e off / j button (13)
repeatedly until the display shows
No/Oldfilter.
5. Select Activate filter with the upper
rotary knob (15).
6. Press the
start
button (10).
7. Place a receptacle with a capacity of
0.5 litres under the outlet (6a).
8. Press the
start
button (10).
9. Water will now  ow through the  lter to
rinse it.
10. Empty the container.
The appliance is ready to use once more.
Note: Rinsing the  lter simultaneously ac
tivates the setting for the Change filter!
display.
The  lter is no longer effective when the
Change filter!display appears, or at
the latest after 2 months. It needs to be
replaced for reasons of hygiene and so that
there is no buildup of limescale (this could
damage the appliance). Replacement  lters
can be obtained from retailers (TZ70003) or
from customer service (467873). If no new
lter is used, turn the f ilter setting to
No / Old.
Note: You can use the  lter indicator to
mark the month in which you inserted the
lter. You can also mark the month in which
you will need to replace the  lter next (at
the latest after two months).
Note: If the appliance has not been used
for a prolonged period (e.g. vacation) the
lter should be rinsed before the appliance
is used again. To do so, dispense a cup of
hot water and pour it away.
Menu settings
You can adapt the appliance to your indi
vidual needs in the menu settings.
1. Hold the e off / j button (13) down for
at least 3 seconds.
2. Press the e off / j button (13) repeated
ly until the required menu item appears
in the display.
3. Select the required setting with the
upper rotary knob (15).
4. Con rm by pressing the start button (10).
To leave the menu without making any
changes, turn the rotary selector to Exit
and press the start button (10).
TE506_1DE.indb 30 20.06.2012 11:57:58
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens TE509501 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens TE509501 in the language / languages: German as an attachment in your email.

The manual is 12,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens TE509501

Siemens TE509501 User Manual - English, Dutch, French, Italian - 126 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info