620382
50
Zoom out
Zoom in
Previous page
1/56
Next page
50/56 CC1B7865E February 10, 2000 Landis & Staefa Division
10. What to do, if ...
This is an indication that a measured value is not being acquired correctly.
)
The detection of measured value range crossings depends on the type of
sensor used.
Ö
Section 11.3.2 «Measured value circuit monitoring»
Display Description Cause / controller behavior / remedy
1999
60.0
7865p08/0200
Actual value display
(red) shows «1999»
flashing.
Setpoint display shows
the setpoint.
*
Overrange or underrange on analog
input 1.
The actual value is not being measured.
Controller initiates lockout.
Ö
Section 5.3 «Safety shutdown»
The limit comparator responds to analog
input 1 according to the configuration
(C113).
Check the electrical connections for
open-circuit of sensor
1999
tA
7865p10/0200
When analog input 3 is
configured for outside
temperature (C111) and
the measured value is
called up, the actual
value display (red)
shows «1999» flashing.
*
Overrange or underrange on analog
input 3.
The outside temperature is not being
measured!
The weather-dependent setpoint is
inactive!
Check the electrical connections for
open-circuit of sensors
1999
SP.E
7865p09/0200
When analog input 2 is
configured (C111) and
the measured value is
called up, the process
value display (red)
shows «1999» flashing.
*
Overrange or underrange on analog
input 2.
The external setpoint is not being
measured. Controller initiates lockout
Ö
Section 5.3 «Safety shutdown»
Check the electrical connections for
open-circuit of sensors
53.2
1999
7865p07/0200
Actual value display
(red) shows «XXXXXX».
Setpoint display (green)
shows «1999» flashing.
*
Overrange or underrange on analog
input 2.
The setpoint shift is not being measured.
Controller initiates lockout
Ö
Section 5.3 «Safety shutdown»
Check the electrical connections for
open-circuit of sensor
10.1 ...numbers are flashing on the display
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens RWF40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens RWF40 in the language / languages: English as an attachment in your email.

The manual is 0,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info