657261
74
Zoom out
Zoom in
Previous page
1/108
Next page
74/108
Siemens Basic Documentation RVP340, RVP350, RVP351 CE1P2545en
Building Technologies 17 Function block: Service functions and general settings 15.03.2011
17.3.3 Sensor test
Operating line 163 can be used to check the connected sensors; if available, the
current setpoints and limit values are displayed on operating line 164.
The 8 temperatures can be queried by entering 0...8:
Input
Op. line 163 (actual values) Op. line 164 (setpoints)
0 Actual value of outside sensor at
terminal B9.
If the outside temperature is ob-
tained via data bus, the display
shows ---
No display
1 Actual value of flow temperature
sensor at terminal B1
Flow temperature setpoint.
If there is no heat request, the
display shows ---
2 Actual value of room temperature
sensor at terminal B5
Room temperature setpoint
3 Actual value of room unit at termi-
nal A6
Room temperature setpoint
4 Actual value of return sensor at
terminal B7.
If the return temperature is ob-
tained via data bus, the display
shows ---
Limit value of return temperature.
If there is no return temperature
limitation, the display shows ---
5* Actual value of storage tank sen-
sor at terminal B31
D.h.w. temperature setpoint
6* Actual value of storage tank sen-
sor at terminal B32
D.h.w. temperature setpoint
7* Actual value of collector sensor at
terminal B6
Setpoint of collector sensor (cor-
responds to actual value of stor-
age tank sensor B32 plus tem-
perature differential solar ON on
operating line 201)
8* Actual value of boiler sensor at
terminal B2
Boiler temperature setpoint
(switch-off point).
If there is no heat request, the
display shows ---
* Not available with RVP340
Errors in the measuring circuits are displayed as follows:
= short-circuit (thermostat: contact closed)
– – – = interruption (thermostat: contact open)
When changing from operating line 163 to 164, or vice versa, the selected sensor
(setting 0…8) is maintained.
74


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens RVP340 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens RVP340 in the language / languages: English as an attachment in your email.

The manual is 1,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens RVP340

Siemens RVP340 User Manual - German - 108 pages

Siemens RVP340 User Manual - French - 112 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info