657261
73
Zoom out
Zoom in
Previous page
1/108
Next page
73/108
Siemens Basic Documentation RVP340, RVP350, RVP351 CE1P2545en
Building Technologies 17 Function block: Service functions and general settings 15.03.2011
17.3 Commissioning aids
17.3.1 Simulation of outside temperature
To facilitate commissioning and fault tracing, outside temperatures in the range
from 50 to 50 °C can be simulated. Simulation has an impact on the current, the
composite and the attenuated outside temperature.
Simulated T
A
= current T
A
= composite T
A
= attenuated T
A
During the simulation, the current outside temperature (as acquired by the sensor
or via LPB) is overridden.
When simulation is completed, the current outside temperature gradually readjusts
the composite and the attenuated outside temperature to their correct values.
Hence, simulation of the outside temperature leads to a reset of the attenuated and
the composite outside temperature.
Simulation can be ended in one of 3 different ways:
By entering --.-
By leaving the setting level by pressing any of the operating mode buttons
Automatically after 30 minutes
17.3.2 Relay test
The output relays can be individually energized. The following codings apply,
depending on the type of controller and type of plant:
RVP340:
Input Relay test Relay
0 Normal operation (no test)
1 All relays deenergized
2 Actuator heating circuit OPEN Y1
3 Actuator heating circuit CLOSE Y2
4 Heating circuit pump ON Q2
5 Multifunctional relay K6 energized K6
RVP35..
Input Relay test Relay
0 Normal operation (no test)
1 All relays deenergized
2 Burner stage 1 ON K4
3 Burner stages 1 and 2 ON K4 and K5
4 Heating circuit pump ON Q1
5 Storage tank charging pump ON Q3
6 Actuator heating circuit OPEN Y1
7 Actuator heating circuit CLOSE Y2
8 Heating circuit pump ON Q2
9 Multifunctional relay K7 energized K7
10 Multifunctional relay K6 energized K6
The relay test can be ended in one of 4 different ways:
By entering 0 on the operating line
By leaving the setting level by pressing
or
By leaving the setting level by pressing any of the operating mode buttons
Automatically after 30 minutes
73


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens RVP340 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens RVP340 in the language / languages: English as an attachment in your email.

The manual is 1,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens RVP340

Siemens RVP340 User Manual - German - 108 pages

Siemens RVP340 User Manual - French - 112 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info