555850
32
Zoom out
Zoom in
Previous page
1/46
Next page
32/46
Siemens Heating controllers RVP201 and RVP211 CE1P2464en
Building Technologies 4 Handling 12.12.2007
Function Switch position "left" Symbol Switch position "right"
Type of regulating unit Control of a motorized
seat or slipper valve
Control of a burner (at-
mospheric or forced
draught)
Type of control Three-position (modulat-
ing)
Two-position (on/off)
Frost protection Yes, frost protection
No, no frost protection
Priority of d.h.w. heat-
ing (only with the
RVP211)
With priority (absolute).
Underfloor heating sys-
tems and boiler opera-
tion: always use "abso-
lute"!
No priority (parallel)
RVP211 with boiler temperature control:
Regulating unit for
d.h.w. heating
Changeover valve
Charging pump
In the case of boiler temperature control with the RVP211, coding switch "Type of con-
trol" is used for entering the d.h.w. regulating unit.
The factory-set value (default value) is marked by a dot z. This value can be used as a
guide value. If no plant-specific settings are available, the factory settings should be
used.
Potentiometer Function Setting range Guide values, notes
Switching differen-
tial with two-position
control
1…20 K
Effective only with burner
control:
guide value 6 K
Effect of room tem-
perature on flow
temperature control
0…100 % authority
Guide value for plants with
outside sensor: 50 %
Quick setback is
active/ inactive
Off
Off = quick setback is inac-
tive
Heating limit for
ECO automatic
energy saver
–10…+ 8 K
The setting refers to
the room tempera-
ture setpoint
At 20 °C room tempera-
ture, the default value of
–3 K gives a heating limit
of 17 °C.
To disable the function: set
to Off
Maximum limitation
of flow or boiler
temperature
10…100 °C
Guide value for underfloor
and ceiling heating sys-
tems: 55 °C max.
To disable the function: set
to Off
4.1.2 Setting and readjusting the room temperature
To make the basic setting and to readjust the room temperature, there are two setting
elements available:
For setting the heating curve slope, use setting knob
For manual readjustment of the room temperature, use setting knob
; its scale
gives the room temperature differential in °C; this setting produces a parallel dis-
placement of the heating curve
Coding switches
Note
Setting potentiometer
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens RVP201 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens RVP201 in the language / languages: English as an attachment in your email.

The manual is 0,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens RVP201

Siemens RVP201 Installation Guide - English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Finnish - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info