555850
33
Zoom out
Zoom in
Previous page
1/46
Next page
33/46
Siemens Heating controllers RVP201 and RVP211 CE1P2464en
Building Technologies 4 Handling 12.12.2007
Recommendations:
Room temperature is not correct, especially in mild weather:
Readjust the room temperature with setting knob
; one graduation corresponds to
a room temperature change of about 2 °C
Room temperature is not correct, especially in cold weather:
Readjust the heating curve slope with setting knob
:
Room temperature too high: reduce slope by about 0.2
Room temperature too low: increase slope by about 0.2
Room temperature is not correct, especially at night:
Readjust the setback with setting knob
; its scale gives the setback in °C
4.1.3 Selection of operating mode
The required operating mode is set with the selector on the front of the controller. Also,
using an external switch connected to terminals A6-MD, the current operating mode
can be overridden from a remote location:
Contact closed: the controller operates in protection mode
Contact open: the controller operates in the mode selected with the slider
4.2 Mounting
4.2.1 Mounting location
The controller should be mounted in a dry location, such as the boiler room.
The permissible ambient temperature in operation is 0…50 °C.
The RVP201/211 can be mounted as follows:
In the control panel, on the inner wall or on a top hat rail
On a panel front
In the control panel front
In the sloping front of a control desk
4.2.2 Mounting methods
The RVP201/211 is designed for three different mounting methods:
Wall mounting: the base is secured to a flat wall with the help of three fixing screws
Rail mounting: the base is fitted to the top hat rail
Flush panel mounting: the base is fitted in a panel cutout measuring 138 × 92 mm
4.2.3 Installation
Local regulations for electrical installations must be complied with
The cable lengths should be selected such that the control panel front can be easily
opened
Cable tension relief must be ensured
The cables of the measuring circuits carry extra low voltage
The cables from the controller to the regulating unit and to the pumps carry
AC 24…230 V mains voltage
Sensor cables must never be run parallel to mains carrying cables connecting loads
such as actuators, pumps, burners, etc. (safety class II to EN60730)
Maximum limitation of the boiler temperature is not a safety function; for this pur-
pose, a thermostat or limit thermostat must be used and connected to L–F1/F4
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens RVP201 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens RVP201 in the language / languages: English as an attachment in your email.

The manual is 0,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens RVP201

Siemens RVP201 Installation Guide - English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Finnish - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info