555850
22
Zoom out
Zoom in
Previous page
1/46
Next page
22/46
Siemens Heating controllers RVP201 and RVP211 CE1P2464en
Building Technologies 3 Technical design 12.12.2007
t
2464D01
w
R
x
R
T
R
,
5 K
Boost heating
T
R
Room temperature
t Time
w
R
Setpoint boost
w
R
Room temperature setpoint
x
R
Actual value of room temperature
3.4.2 Quick setback
When changing from the normal temperature to a lower level (reduced temperature or
protection), the heating will be shut down (mixing valve closes or burner off, heating
circuit pump off), and it remains shut down until the room temperature has reached the
setpoint of the lower temperature level. Then, the heating switches on again and main-
tains the current setpoint.
Quick setback can be provided only if a room temperature sensor (room unit) is used.
This function can be deactivated with the setting potentiometer E (position Off).
3.5 ECO automatic energy saver
3.5.1 Fundamentals
The ECO automatic energy saver controls the heating depending on demand. It takes
into account the building construction-dependent behavior of the room temperature
when the outside temperature changes. If the amount of heat stored in the building is
sufficient to maintain the current room temperature setpoint, the heating will be shut
down (mixing valve closes or burner off, heating circuit pump off).
In the RVP201/211, the ECO automatic energy saver is subdivided into two part func-
tions. ECO function 1 is used predominantly in the summer while ECO function 2 re-
sponds primarily to short-term temperature variations and is therefore active during
intermediate seasons.
Operation of the ECO automatic energy saver is dependent on the operating mode:
Operating mode ECO
Automatic mode
Active
Automatic mode
Active
Normal mode
Inactive
Setback mode
Active
Protection mode
Active
Manual operation
Inactive
D.h.w. heating only (only with RVP211)
Inactive
ECO automatic energy saver active means:
Seat or slipper valve closed or burner off
Heating circuit pump switched off (it can only be activated by frost protection for the
plant)
Owing to the ECO automatic energy saver, the heating operates only or consumes
energy only if really required.
If desired, the ECO automatic energy saver can be deactivated.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens RVP201 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens RVP201 in the language / languages: English as an attachment in your email.

The manual is 0,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens RVP201

Siemens RVP201 Installation Guide - English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Finnish - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info