555868
6
Zoom out
Zoom in
Previous page
1/14
Next page
6 / 14
Siemens Operating Instructions RMH760B, RMK770 CE1B3133_en
Building Technologies Do you want to heat according to the heating program? 2015-03-31
Do you want to heat according to the heating program?
In room operating mode , the controller operates
according to the selected heating program.
Heating program
The heating program contains the start time and the
associated room operating mode (room setpoint) for all
phases of the 24-hour heating program. The heating
program has been entered for you. If you wish, you can
change the entries made to satisfy your personal needs.
If your plant comprises several heating circuits, you can
select the heating program for every heating circuit
separately (e.g. path: > Heating circuit 2 > …).
Example of a heating program:
Tuesday
From 06:00 Comf
From 06:00: Comfort mode
From 11:30: Precomfort mode
From 12:30: Comfort mode
From 19:00: Precomfort mode
From 21:00: Economy mode
Please note that the heating program does not contain switching times but periods of time for the required temperature levels.
The switching times are calculated by the controller’s optimization function!
Do you want to change the daily heating periods?
General information about the heating program
In the heating program, you can set the daily heating peri-
ods to suit your individual needs. Each day can accommo-
date a maximum of 6 switching points; a room setpoint must
be assigned to each heating period.
In addition to the weekdays (Monday through Sunday), you
can program a special day, that is, a special 24-hour heating
program.
The special day will be activated when you make an entry
on the Holidays/special days menu (
page 9).
If your plant comprises several heating circuits, you can set
the heating program for every heating circuit separately (e.g.
path: … > Time switch 2 > ).
Changes on the controller can be made only if the heating
program is predefined by the time switch in the controller.
Otherwise, it is an external operator station.
Prior to making entries, please observe
· First, always enter the start time of the heating period,
then the room operating mode of that period
· You have room operating modes
, and to choose
from. Adjust the associated setpoints on the Room
setpoints menu (
page 7)
· You can copy any 24-hour heating program to other days
Changing and canceling times and setpoints
1. Select the required day.
2. In the diagram, advance pointer
to the point in time to
be changed.
3. Set the required time.
Canceling the time: Reset the time via 00:00 until --
:-- appears.
4. Select the required setpoint.
5. If required, set additional times and select additional
setpoints.
Path:
>
Heating circuit > Time switch
Entering additional heating periods
1. Select the required day.
2. In the diagram, advance pointer
to the last point in
time of the current program.
3. Turn the OK knob by one notch;
--:-- ------ appears.
4. Set the required start time.
5. Select the required room operating mode.
Copying a 24-hour heating program
1. Select the day to be copied.
2. Turn the OK knob in clockwise direction until Copy to:
appears.
3. Press the OK knob.
4. The menu with the selection of days (week section,
individual weekdays, special day) appears.
5. Select the required weekday or week section.
6. Copy (press the OK knob).
New 24-hour program
The controller is supplied with a 24-hour program for every
day (including the special day). This means that you will
never have to create a new 24-hour program, but only
change an existing program.
Power off – heating program lost?
In the event of a power failure, the 24-hour programs en-
tered will be maintained, independent of the duration of the
power failure.
First, prepare a 7-day schedule for the daily heating periods and setpoints – this will facilitate entry into the controller!
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens RMK770 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens RMK770 in the language / languages: English as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens RMK770

Siemens RMK770 User Manual - German - 14 pages

Siemens RMK770 User Manual - Dutch - 34 pages

Siemens RMK770 User Manual - French - 14 pages

Siemens RMK770 Installation Guide - All languages - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info