Manual Siemens REV24RF (page 10 of 56) (All languages)

620390

Zoom out

Zoom in

1/56

10/56 2015-03-18 CE1G2206xx

The expert level is quit by pressing the operating mode selection button .

Code list

Function block Code Name Factory setting Your setting

Basic settings

00 Language English

01 Sensor calibration off

02 Switching differential 0.5 °C

LCD settings

10 Illumination time 10 seconds

11 Background brightness 0

12 Contrast 0

Clock settings

Time zone

Deviation from time signal received from Frankfurt

(Central European Time CET) (refer to Note 1)

0 hours

31 Start of summer time (refer to Note 2) March 31 (31-03)

32 End of summer time (refer to Note 3) October 31 (31-10)

Note 1: If the radio clock is not active or not present, this setting has no impact.

With the radio clock active, the time signal received from Frankfurt is shifted by the value set under code 30 (time zone).

Note 2: If the radio clock is not active or not present, the time change always takes place at 02:00 on the Sunday before the set date.

With the radio clock active, the time change is shifted by the value set under code 30 (time zone).

Note 3: If the radio clock is not active or not present, the time change always takes place at 03:00 on the Sunday before the set date.

With the radio clock active, the time change is shifted by the value set under code 30 (time zone).

3 Function check

a) Check the display. If there is no display, check the batteries

b) “Continuously Comfort mode“

, read the temperature displayed

c) REV.. in heating mode: Set the temperature setpoint to a level above the

displayed room temperature (see operating instructions).

REV.. in cooling mode: Set the temperature setpoint to a level below the

displayed room temperature (see operating instructions).

d) The relay and thus the actuating device must respond within

1 minute. Symbol ▲ appears on the display. If not:

· Check actuating device and wiring

· In heating mode, the room temperature is possibly higher than the

adjusted temperature setpoint, in cooling mode possibly lower

e) Set temperature setpoint of “Continuously Comfort mode“ to the

required level

f) Select the required operating mode

4 Reset

User-defined settings:

Press simultaneously

, and for 3 seconds:

All temperature and time settings of the slider positions are reset to their default

values (refer to section “Factory settings“ in the operating instructions). The

settings made on the expert level will remain unchanged.

The clock starts at 12:00, the date on 01-01-08

(01 - January - 2008). During the reset time, all sectors of the display are

illuminated and can thus be checked.

All user-defined settings plus those made on the expert level:

Press simultaneously the DIP switch reset button, and for 5

seconds:

After this reset, all factory settings will be reloaded. This applies to both the

slider settings and the settings made on the expert level.

Notes

· The controller is classified as a device of software class A and designed

for use in environments with normal degree of pollution

· REV24RF/SET is a set of units consisting of electronic room temperature

controller with 7-day time switch, RF transmitter (REV24RF..) and RF

receiver (RCR10/868)

how can i take auto off my controls so i can have heating on when i want Submitted on 3-12-2022 at 12:54
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Siemens REV24RF in the language / languages: All languages as an attachment in your email.

The manual is 1,5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens REV24RF

Siemens REV24RF User Manual - English - 2 pages

Siemens REV24RF User Manual - German - 2 pages

Siemens REV24RF User Manual - French - 2 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Siemens REV24RF Manual

Product: