57677
4
Zoom out
Zoom in
Previous page
1/8
Next page
CE1N2252E / 14.01.1999 Siemens Building Technologies
4/8 Landis & Staefa Division
If the displayed room temperature does not agree with the measured temperature, the
temperature detector can be recalibrated.
When the setting slider is set to the position
Day /
, press button . Then, the display will
change as follows:
1234567
0 6 12 18 24
2252Z14
By pressing button or , the temperature can be changed in increments of
0.2 °C (max. ±2 °C). On completion of the readjustment, the setting slider must be reset
to the Auto/Run position.
When pressing buttons
and simultaneously, all individual settings will be
reset to their standard values.
Resetting also serves as a display check:
1234567
0 6 12 18 24
COOLING
2252Z13
After a reset, all individual settings such as time, day, switching times, etc., must be re-
entered.
With the help of a suitable remote operation unit, the
REV22T
can be switched to the
economy temperature set for operating mode . Changeover takes place through the
making of a
potential-free contact
connected to terminals T1 and T2.
The display indicates this with the symbol .
After the contact opens, the selected operating mode becomes active again.
Operation according to the settings made
on the controller
Continuous economy temperature
T2
T1
2252Z05
T2
T1
2252Z06
Suitable remote operation units are:
Telephone modem, manual switch, window switch, presence detector, central unit, etc.
Calibration of detector
Reset
Remote operation
(REV22T)
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens REV 22 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens REV 22 in the language / languages: English as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens REV 22

Siemens REV 22 User Manual - Dutch - 2 pages

Siemens REV 22 User Manual - French - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info