459669
45
Zoom out
Zoom in
Previous page
1/60
Next page
45 / 60
Siemens RDG100, RDG100T, RDG110, RDG140, RDG160 Basic Documentation CE1P3181en
Building Technologies Functions 19 Jun 2009
4.15 Control parameters
A number of control parameters can be readjusted to optimize control performance.
These parameters can also be set during operation without opening the unit. In the
event of a power failure, all control parameter settings are retained.
The control parameters are assigned to 2 levels:
“Service level”, and
“Expert level” with "Diagnostics and test"
The “Service level” contains a small set of parameters to set up the thermostat for
the HVAC system and to adjust the user interface. These parameters can usually
be adjusted any time.
Change parameters at the “Expert level” carefully, as they impact control
performance and functionality of the thermostat.
Change the parameters as follows:
1. Press left and right button simultaneously for >3 seconds, release them,
then press the right button for >3 seconds.
The display shows “P01”.
Continue with step 2.
1. Press left button and right button simultaneously for >3 seconds, release
them, press the left button for >3 seconds, then turn the rotary knob
counterclockwise min. ½ rotation.
The display shows “Pxx”.
Continue with step 2.
2. Select the required parameter by turning the rotary knob.
3. Press button
(OK); the current value of the selected parameter starts
blinking and can be changed by turning the rotary knob.
4. Press button
(OK) to confirm the adjusted value or press button (Esc) to
cancel the change.
5. If you wish to adjust additional parameters, repeat steps 2…4.
6. Press button
(Esc) to leave the parameter setting mode.
The factory setting for the control parameters can be reloaded via parameter P71,
by changing the value to “ON”. Confirm by pressing the right button.
The display shows “8888” during reloading.
Parameter setting
Enter only “Service level”
Enter “Expert level” and
"Diagnostics and test"
Adjusting parameters
Resetting parameters
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens RDG140 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens RDG140 in the language / languages: English as an attachment in your email.

The manual is 3,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens RDG140

Siemens RDG140 User Manual - German - 64 pages

Siemens RDG140 User Manual - French - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info