671508

Siemens LOGO Soft Comfort Online Help Manual

348
Zoom out
Zoom in
Previous page
1/414
Next page
Reference material
5.3 Special functions
LOGO!Soft Comfort Online Help
348 Operating Instructions, 11/2017
The screen display alternates between the two message halves every second.
You can configure each individual line of a message text to tick or not to tick at all. The
"character by character" or "line by line" setting applies to all lines that you configure to tick.
Select the check box beside a line number to enable ticking for that line.
Bar graphs
You can specify a bar graph representation for the actual value of any other function block in
your circuit program. The bar graph can be horizontal or vertical on the LOGO! onboard
display or LOGO! TD. You can configure up to four bar graphs per message text.
Use the bar graph button
in the message text area to place a bar graph in the message
text area. From the Bar Setting dialog you must provide the following information:
● Block from your circuit program that the bar graph represents
● Minimum and maximum value for the bar graph: LOGO! will calculate the length or height
of the bar graph by scaling the actual value between the minimum and maximum values.
● Orientation of the bar graph: horizontal or vertical
● Width or height of the bar graph, in character spaces
Example:
Consider a bar graph in a message text with the following characteristics:
● Configured bar graph length: 4 character spaces
● Orientation: Horizontal
● Configured minimum value: 1000
● Configured maximum value: 2000
● Actual value: 1750
The resulting bar graph will be 3 character spaces long.
Text representation of digital I/O states
You can assign names such as "On" or "Off" to the two states of a digital input or output.
With the LOGO! 0BA6 and 0BA7 series, you can display this name of a digital I/O state in a
message text. The maximum number of characters for a state name is eight for Western
language character sets; for Asian language character sets the number of characters is four.
Use the ON/OFF button in the message text area to define names for the two states of a
digital input or output to be used in the message text.
Within a single message text, you can configure up to four digital I/O state name displays.
Within one circuit program, a maximum of 20 I/O state names can be used in message text
function blocks.
Display of remaining timer time
With the LOGO! 0BA6 series, you can display the remaining time of a timer in a message
text. Prior to this feature you could display the current elapsed time of a timer and the timer
parameters.
… 348 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens LOGO Soft Comfort Online Help at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens LOGO Soft Comfort Online Help in the language / languages: English as an attachment in your email.

The manual is 12,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens LOGO Soft Comfort Online Help

Siemens LOGO Soft Comfort Online Help User Manual - German - 428 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info