671508

Siemens LOGO Soft Comfort Online Help Manual

346
Zoom out
Zoom in
Previous page
1/414
Next page
Reference material
5.3 Special functions
LOGO!Soft Comfort Online Help
346 Operating Instructions, 11/2017
Message text character set
LOGO! 0BA6 and higher versions support five character sets for messages. Of these, you
can select two for the display of message texts with the File → Message Text Settings
(Page 54) menu command or from the "Msg Config" menu of LOGO!. Of the fifty possible
message texts that you can configure, you can select any number of them to be from the first
language and any number from the second language. For example, you could configure fifty
message text function blocks that have a single message text for Character Set 1.
Alternatively, you could configure twenty-five message text function blocks, each of which
has two message texts: one for Character Set 1 and one for Character Set 2. Any
combination is valid such that the total does not exceed fifty.
The Message text dialog displays the character sets that are currently available for your
message text, as configured in the message text settings. To use a character set, select the
"Enabled" check box, and the button for the character set. Characters that you subsequently
type will be from the character set that you enabled and selected. If you deselect the
"Enabled" check box for a character set, LOGO!Soft Comfort will prompt you for confirmation
and then delete the message text, if it exists, that corresponds to that character set.
The character set of a message text is independent of the language setting for the
LOGO! onboard display menus. They can be different.
Chinese character set
The LOGO! Base Module and LOGO! TD support the Chinese character set (GB-2312) for
the People's Republic of China. The devices use Microsoft Windows encoding for this
character set. The Windows encoding allows the devices to display the same characters as
shown in the LOGO!Soft Comfort message text editor when you are using a Chinese
emulator or a Chinese version of Microsoft Windows.
The Chinese character set requires a Chinese version of Windows or a Chinese emulator to
properly display Chinese characters in the LOGO!Soft Comfort message text editor. You
must start the Chinese emulator before you open the the message text function block in
LOGO!Soft Comfort.
Message ticker
You can configure a message text to tick, or to not tick. Two types of message ticking exist:
● Character by character
● Line by line
Messages that tick character by character scroll off the characters of the message line one
character at a time to the left with the additional characters scrolling in one at a time from the
right. The time interval for the tick is specified by the TickTime message text setting.
Messages that tick line by line by line scroll one half of the message off the display to the left
with the second half of the message scrolling in from the right. The time interval for the tick is
ten times the TickTime parameter. The two halves of the message simply alternate on the
LOGO! onboard display or LOGO! TD.
The tick time is the interval of time by which a character or a line of text ticks off the screen.
The tick time is a global message text parameter for all message texts.
Example: Tick Message Character by Character
… 346 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens LOGO Soft Comfort Online Help at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens LOGO Soft Comfort Online Help in the language / languages: English as an attachment in your email.

The manual is 12,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens LOGO Soft Comfort Online Help

Siemens LOGO Soft Comfort Online Help User Manual - German - 428 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info