671508
105
Zoom out
Zoom in
Previous page
1/414
Next page
User interface
2.8 Menu bar
LOGO!Soft Comfort Online Help
Operating Instructions, 11/2017
105
While simulation mode is active, you can also right-click a digital input in the circuit program
and edit its block properties. In the Simulation tab of the block properties dialog, you can
select the type of the input as described above.
Click "
OK
" to confirm your settings.
2.8.5.28
Tools -> Connect Modem
You can build network connections between LOGO!Soft Comfort and LOGO! devices to
download and upload circuit programs or network projects by configuring their connected
modems. LOGO!Soft Comfort supports 11-bit modems that use standard AT commands.
Select the
Tools
Connect Modem
menu command to start the process of configuring
modems connected to your PC with LOGO!Soft Comfort. The LOGO! Base Module at the
remote side is also connected with a modem and ready for network connection. LOGO!Soft
Comfort displays a Modem Information dialog that provides an overview of the configuration
process.
You must complete a series of dialogs to configure your modems. After you configure the
modems and make the connections, you can download and upload circuit programs or
network projects between LOGO!Soft Comfort and LOGO! Base Module across a telephone
line connection over the modems.
The steps for connecting and configuring modems are listed below:
1. Select Modem (Page 106)
2. Select Remote Configuration (Page 106)
3. Configure Remote Modem Command (Page 106)
4. Configure Remote Modem (Page 107)
5. Select Local Configuration (Page 107)
6. Configure Local Modem Command (Page 107)
7. Configure Telephone Number (Page 108)
From the modem configuration dialogs, you can click "
Next
" to proceed through the dialogs,
or click "
Previous
" to return to an earlier step.
Note
This menu command is valid only for LOGO! devices series 0BA6 or later.
105


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens LOGO Soft Comfort Online Help at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens LOGO Soft Comfort Online Help in the language / languages: English as an attachment in your email.

The manual is 12,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens LOGO Soft Comfort Online Help

Siemens LOGO Soft Comfort Online Help User Manual - German - 428 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info