671508

Siemens LOGO Soft Comfort Online Help Manual

104
Zoom out
Zoom in
Previous page
1/414
Next page
User interface
2.8 Menu bar
LOGO!Soft Comfort Online Help
104 Operating Instructions, 11/2017
● Momentary pushbutton (break)
● Frequency
You have only one option for the analog inputs:
● Analog
Name column
"I" designates Digital inputs (Page 218).
"AI" designates Analog inputs (Page 222).
Switch
A switch latches when actuated and is released by actuating it once again.
Momentary pushbutton
A momentary pushbutton is only active while it is held down. The contact opens as soon as
you release the button.
You can determine a make or break action for the pushbuttons.
Frequency
You can preset or change the frequency of an input while a simulation is running. The device
frequency is in Hz. A frequency input is a special case, which is only used in conjunction with
the threshold trigger SFB.
Analog
You can preset the value for the analog input (Page 222) or modify it while running in
simulation mode. The units for the analog value corresponds with the default process
variable. The range corresponds with the specified measurement range, provided you have
selected the option of "Auto range". The value range corresponds in this case with the
measurement range of the function connected to the input. The analog input represents a
special case for analog SFBs.
Refer to the information in the "Analog value processing" section (Page 312) for help on
analog block parameters.
Settings
When you save your circuit program, you also save the simulation settings. Thus, you do not
need to enter the simulation parameters once again when you exit and reopen your circuit
program.
While simulation mode is active, you can click a digital input in the list of input switches to
change its settings. From the drop-down list select Switch, Momentary pushbutton (make),
Momentary pushbutton (break) or Frequency. Use the OK button to enter your settings.
… 104 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens LOGO Soft Comfort Online Help at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens LOGO Soft Comfort Online Help in the language / languages: English as an attachment in your email.

The manual is 12,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens LOGO Soft Comfort Online Help

Siemens LOGO Soft Comfort Online Help User Manual - German - 428 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info