671508
80
Zoom out
Zoom in
Previous page
1/414
Next page
User interface
2.8 Menu bar
LOGO!Soft Comfort Online Help
80 Operating Instructions, 11/2017
2.8.5.7
Tools -> Transfer -> Synchronize clock with EM
LOGO!Soft Comfort requires that you confirm the connection interface for each
communication attempt. See "Tools -> Transfer (Page 73)" for complete information.
This command allows you to either enable or disable the clock synchronization among
LOGO! Base Module and its connected expansion modules.
With this command:
You can choose to synchronize the clock of the LOGO! expansion modules to be the
same as that on the LOGO! Base Module.
You can also choose to allow different clock settings on the LOGO! Base Module and its
connected LOGO! expansion modules.
2.8.5.8
Tools -> Transfer -> Show FW version
LOGO!Soft Comfort requires that you confirm the connection interface for each
communication attempt. See "Tools -> Transfer (Page 73)" for complete information.
This command allows you to identify the firmware version of the LOGO! Base module.
2.8.5.9
Tools -> Transfer -> Clear User Program and Password
LOGO!Soft Comfort requires that you confirm the connection interface for each
communication attempt. See "Tools -> Transfer (Page 73)" for complete information.
This command allows you to clear the circuit program in the connected LOGO! device and
the program password if a password exists.
You must respond to a confirmation dialog to ensure that you do intend to clear both the
circuit program and the password (if configured) from the LOGO! device. After you confirm
the command, LOGO!Soft Comfort performs the clear operation. If you do not confirm the
command, LOGO!Soft Comfort performs no action. The circuit program and password (if
configured) remain in the LOGO! device.
Note
LOGO! devices prior to version 0BA6 do not support this function. If you attempt this
command on an earlier device, LOGO!Soft Comfort displays a message that states that the
device does not support this fu
nction.
2.8.5.10
Tools -> Transfer -> Upload Data Log (0BA7 and later versions only)
LOGO!Soft Comfort requires that you confirm the connection interface for each
communication attempt. See "Tools -> Transfer (Page 73)" for complete information.
This menu allows you to upload a data log from the EEPROM or SD card to the PC when the
Base Module is in RUN mode.
You can upload your data log and browse to a desired directory and save your data log
document.
80


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens LOGO Soft Comfort Online Help at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens LOGO Soft Comfort Online Help in the language / languages: English as an attachment in your email.

The manual is 12,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens LOGO Soft Comfort Online Help

Siemens LOGO Soft Comfort Online Help User Manual - German - 428 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info