671508
78
Zoom out
Zoom in
Previous page
1/414
Next page
User interface
2.8 Menu bar
LOGO!Soft Comfort Online Help
78 Operating Instructions, 11/2017
Tools → Transfer: Hours counter (Page 88)
Tools → Transfer: I/O Status (Page 89)
Tools → Transfer: Diagnostic (Page 90)
Tools → Transfer: Dynamic Server IP Filter (Page 91)
Tools → Transfer: Configure TDE Device (Page 93)
2.8.5.2
Tools -> Transfer -> PC -> LOGO!
LOGO!Soft Comfort requires that you confirm the connection interface for each
communication attempt. See "Tools -> Transfer (Page 73)" for complete information.
→Tools → Transfer:
PC
LOGO!
You can use this menu command to download a circuit program created with the LOGO!Soft
Comfort from PC to the LOGO! Base Module. You can also use the
button in the standard
toolbar (Page 36) for such purpose.
Preparations
Prior to the download, the system determines the minimum LOGO! version required for your
circuit program. The modular LOGO! always provides all available I/O resources (Page 401)
for your circuit program. You are free to install an appropriate number of expansion modules
in the base device.
Error messages
LOGO!Soft Comfort aborts the transfer and displays an error message if the LOGO! Base
Module does not have enough resources for program transfer. The error dialog displays
unknown LOGO! versions prompts you to continue or cancel the download.
The status bar displays transfer messages and the Info Window displays transfer messages
as well as detailed error messages.
Layout recovery (0BA8 only)
When you download a circuit program (FBD only) to your LOGO! Base module, LOGO!Soft
Comfort also downloads the program layout. The LOGO!Soft Comfort reads the layout
information and recovers it automatically when you open it again.
The layout memory size in a LOGO! Basic is up to 30 KB. You can check the available
memory size from the info window by determining LOGO! (Page 97) before saving a circuit
diagram.
2.8.5.3
Tools -> Transfer -> LOGO! -> PC
LOGO!Soft Comfort requires that you confirm the connection interface for each
communication attempt. See "Tools -> Transfer (Page 73)" for complete information.
→Tools → Transfer:
LOGO!
PC
You can use this menu command to upload a circuit program from the LOGO! Base Module
to PC. You can also use the
button in the standard toolbar (Page 36) for such purpose.
78


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens LOGO Soft Comfort Online Help at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens LOGO Soft Comfort Online Help in the language / languages: English as an attachment in your email.

The manual is 12,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens LOGO Soft Comfort Online Help

Siemens LOGO Soft Comfort Online Help User Manual - German - 428 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info