671508

Siemens LOGO Soft Comfort Online Help Manual

69
Zoom out
Zoom in
Previous page
1/414
Next page
User interface
2.8 Menu bar
LOGO!Soft Comfort Online Help
Operating Instructions, 11/2017
69
When dragging the handle of the figure above to reduce the figure width, the figure
automatically shrinks to fit the width.
2.8.3.3
Format -> Format grid
This tool helps you to organize the various objects of your circuit program on the
programming interface. The grid is visible by default.
You can adjust the grid pattern (spacing) in increments of 5 points.
If you have enabled the "Snap Block to Grid" function, LOGO!Soft Comfort aligns the objects
with the relevant grid intersections. This helps you to avoid a vertical or horizontal offset of
the objects. To finely position objects on your programming interface, disable the "Snap
Block to Grid" function.
If you have enabled the "Snap Connection to Grid" function, LOGO!Soft Comfort aligns the
connection lines between objects with the relevant grid intersections. To allow connection
lines to stay unaligned with grid lines on the programming interface, disable the "Snap
Connection to Grid" function.
You can hide the grid with the Visibility check box.
You can select the "Use as Default" check box to keep your settings as the default for
LOGO!Soft Comfort circuit programs.
2.8.3.4
Format -> Snap to grid
If you have made changes to the grid pattern, or inserted objects while you disable the grid,
the position of objects may be offset when you align them to the grid points. Use this
command to correct the offset of selected objects and to realign them.
2.8.4
View menu
From the View menu, you can choose the current working mode, decide to show or hide
various toolbars and trees under each mode, and set the zoom factor for the display of your
circuit diagram or network project. The View menu contains the following commands.
● Diagram Mode (Page 70)
● Project Mode (Page 70)
● Toolbars (Page 70)
● Tree (Page 71)
… 69 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens LOGO Soft Comfort Online Help at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens LOGO Soft Comfort Online Help in the language / languages: English as an attachment in your email.

The manual is 12,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens LOGO Soft Comfort Online Help

Siemens LOGO Soft Comfort Online Help User Manual - German - 428 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info