671508

Siemens LOGO Soft Comfort Online Help Manual

67
Zoom out
Zoom in
Previous page
1/414
Next page
User interface
2.8 Menu bar
LOGO!Soft Comfort Online Help
Operating Instructions, 11/2017
67
2.8.2.18
Edit -> Block properties
This command displays the block properties of a block that you have selected on the
programming interface.
The block properties dialog box consists of several tabs. Every block has a Comment tab,
where you can enter relevant block comments. For some blocks a Parameter tab is available
where you can describe specific block parameters. You configure input simulation
parameters from the Simulation tab.
You can also configure the block properties by right-clicking the required block, and selecting
the block properties menu command from the shortcut menu.
2.8.2.19
Edit -> Block properties (all blocks)
This command opens a window with two sections. In the left section, you can see all the
blocks that your program uses. Click a block to view its corresponding parameters in the
right column. You can now edit these parameters and set the changes by clicking the
Apply
button.
LOGO!Soft Comfort displays the modified block in blue in the selection list, if you select
another block without clicking apply button to accept the parameter changes. LOGO!Soft
Comfort discards all changes you click the
Cancel
button. You can confirm all your entries
and exit the dialog with
OK
.
You can sort all the available blocks by name or by number by clicking the corresponding
button on the upper-right of the list area.
Here, you can also make a fuzzy search for blocks. For details, see Edit -> Go to block
(Page 66).
If you select the "Select block from drawing" check box, when you select subsequent blocks
from the list, LOGO!Soft Comfort highlight them in the circuit program.
Special functions (Page 241)
Basic functions (Page 235)
Constants and connectors (Page 217)
… 67 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens LOGO Soft Comfort Online Help at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens LOGO Soft Comfort Online Help in the language / languages: English as an attachment in your email.

The manual is 12,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens LOGO Soft Comfort Online Help

Siemens LOGO Soft Comfort Online Help User Manual - German - 428 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info