19
Switching the fan OFF:
❑ Keep pressing the
Ü
– button until the
fan switches off.
The displayed
{ goes out shortly
afterwards.
Intensive setting:
Maximum power is obtained at the
intensive setting. It is only required for short
intervals.
❑ Keep pressing the
Ü
+ button until a ç
appears in the display.
❑ If the intensive setting is not cancelled by
hand, the fan will automatically switch
back to step } after 10 minutes.
Lighting:
❑ Briefly press the
0 +/0 – button to
switch the light on and off.
❑ The light can be switched on at any
time, even though the fan is switched off.
❑ Adjusting the brightness:
Hold down the
0 + or 0 – button until
the desired brightness is obtained.
Switching on the light automatically, e.g.
via a timer:
❑ Fan and light must be switched off.
Switching on:
Simultaneously press the
0 – and 0 +
buttons.
❑ After approx. 3 seconds the light
switches on to acknowledge the setting.
Switching off:
Repeat the process with the light switched
on.
❑ After approx. 3 seconds the light
switches off to acknowledge the setting.
Operating procedure
Acoustic signal:
❑ When a button is pressed, this is verified
by an acoustic signal.
Switching off the acoustic signal:
❑ Simultaneously press buttons 0 –
and
Ü
– until a signal is emitted after
approx. 3 seconds.
Switching on the acoustic signal:
❑ Repeat the process.
Switching the fan ON
❑ Press the
Ü
+ button.
Setting the required fan speed:
❑ Press the
Ü
+ button.
The fan speed is increased by one step.
❑ Press the
Ü
– button.
The fan speed is reduced by one step.
ṇ The most effective method of removing
vapours produced during cooking is to:
❑ Switch the ventilator ON
as soon as you begin cooking.
❑ Switch the ventilator OFF
a few minutes after you have finished
cooking.
Reduce fan speed
Fan – OFF –
Fan ON and
increase speed
Display for
fan setting
Light
