35934
47
Zoom out
Zoom in
Previous page
1/136
Next page
Personal_Edition_ConfigSettings.fm
Configuration and Settings
Advanced Tab Settings - HiPath-Provider
A31003-S5030-U100-4-7619, March 2009
OpenScape UC Application V3 Personal Edition, Installation and User Guide 47
3.12.10 Port Restrictions
Select Advanced - HiPath-Provider and open the Port restrictions dialog to
enter the port restriction settings for use in firewall environments.
The client begins with default settings. Do not change the settings without
direction from your system administrator.
The communication port that supports signaling and voice connections for
CorNet IP through a gatekeeper are defined by activating the Gatekeeper
CornetIP Port field.
The communication ports that support signaling and voice connections
between a PC and CorNet IP are defined by activating the the
from
field and
the
to
field for the PC-CorNetIP Port range from option.
The communication ports used for signaling and voice connections are
defined by activating the
from
field and the
to
field for the RTP port range
option, the H.245 port range option, and the single H.225-Signaling port.
Note: If no voice transmission is possible during operation despite a correct logon,
make sure that the RTP port range is configured between a min. of 1024 and a max.
of 65353.
Use the Restore Standard Settings button to reset the values to the default
settings.
3.12.11 VPN
Select Advanced - HiPath-Provider and open the dialog VPN.
1. Select whether or not you have a Virtual Private Network (VPN) from the
dropdown menu.
2. If you selected Yes from the dropdown menu because you have a VPN, enter
the IP address of the network.
3.12.12 Quality of Service
Select Advanced - HiPath-Provider and open the dialog Quality of Service.
For each of the transmission layers Layer 2: User Priority acc. to
IEEE802.1p and Layer 3: Priority classes (Codepoint acc. to DiffServ),
you can use the Mark packets option to specify whether the OpenScape
Desktop Client data for the Call Signaling and Voice Payload traffic types is
provided with the following values:
Layer 2: User Priority acc. to IEEE802.1p
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens Hipath 3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Hipath 3000 in the language / languages: English as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens Hipath 3000

Siemens Hipath 3000 User Manual - Dutch - 136 pages

Siemens Hipath 3000 User Manual - Dutch - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info