35934
46
Zoom out
Zoom in
Previous page
1/136
Next page
Configuration and Settings
Personal_Edition_ConfigSettings.fm
Advanced Tab Settings - HiPath-Provider
A31003-S5030-U100-4-7619, March 2009
46 OpenScape UC Application V3 Personal Edition, Installation and User Guide
packets are then no longer exchanged directly between the communication
partners. This option may be enabled when operating the OpenScape
Desktop Client from home (teleworking).
To disable DMC, click the Shut Down DMC checkbox.
Select the Teleworking checkbox if you are using teleworking. Yo must
deactivate this option to operate the OpenScape Desktop Client at an
OpenScape Voice/Cisco Proxy because the communication system will not
be able to send any BLF messages.
In teleworking mode, activate the Suppress cyclical control message to
reduce the data volume or bandwidth requirements via the trunk
Select the Suppress cyclical control message checkbox.
Communication between the OpenScape Desktop Client and the
communication system is based on defined compression algorithms for the
network transmission of audio signals (codecs). Under Codec sequence you
can define the desired sequence of the codecs to be used for the voice
connection. A different selection is made available when activating the
Teleworking option.
Select the setting in the Codec sequence: dropdown that is appropriate
to your site.
The respective voice packet lengths for the codecs G.711, G.723, and G.729
are defvined under Codec packet lengths individually by specifying the
number of milliseconds.
Set each of the three Codec packet lengths with a value from the
dropdown menus. The values are in milliseconds (ms).
To avoid voice packet loss that can result in poor voice quality and dropouts,
set the buffer size in the
Jitter Buffer
field. The jitter buffer caches all incoming
voice packets for the period set and then forwards them t the auido device’s
sound output. The jitter buffer continues to forward voice packets until none
is left, even if the network does not deliver new voice packets quickly enough
this results in dropouts.
Set the Jitter Buffer with a value from the dropdown menu. The values
are in milliseconds (ms).
The following generally applies for an optimum setting: the better the network
quality, the smaller the jitter buffer can be. A larger jitter buffer allows greater
voice delays. The recommended value is 60.
Use the Restore Standard Settings button to reset the values to the default
settings.
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens Hipath 3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Hipath 3000 in the language / languages: English as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens Hipath 3000

Siemens Hipath 3000 User Manual - Dutch - 136 pages

Siemens Hipath 3000 User Manual - Dutch - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info