Manual Siemens GigasetS 100-150 colour (page 13 of 131) (English)

1797

Zoom out

Zoom in

1/131

Preparing the telephone

S100/150 colour Tchibo / UK / A31008-M1575-L131-1-7619 / starting.fm / 01.07.2005

Placing the handset into the base station and charging the batteries

If you place the handset on the base station, it automatically registers. This can be done

as follows:

1. Place the handset in the base station with the display facing upward.

2. Wait until the handset has automatically registered with the base station (page 81):

This takes about a minute. During registration the display shows Regstr.Proce-

dure and it flashes Base 1. After registration you will see "INT 1" in the display,

which means that the handset has been assigned the first internal number. You can

change the handset name "INT 1" (page 84).

3. Leave the handset in the base station to charge the batteries, because they are not

charged at the factory. The charging is indicated in the upper right of the display

where the charging status Ù flashes:

If automatic registration is interrupted, you can register the handset manually as

described from page 81. There is a table of the most important questions and answers

to help you (page 110).

The battery charging status is correctly displayed only after uninterrupted charging/dis-

charging. Therefore you should not remove the batteries unnecessarily or terminate the

charging process early.

Note:

Your telephone is now ready for operation. The answering machine with the pre-

recorded announcement has also been switched on. All you have to do is set the date

and time, so the time of incoming calls and messages can be noted correctly (page 15).

× Batteries flat Ù Batt.

charged

Ø Batteries

charged Ú Batt. fully charged

If you want to register further handsets, please turn to page 81.

For initial charging we recommend a continous, uninterrupted charging

period of seven hours, whatever charge level is indicated! The battery

charge capacity decreases after a few years for technical reasons.

◆ Once the initial charging operation is completed you can replace your

handset in the base station after each call. Charging is controlled

electronically. This ensures optimum charging.

◆ The batteries heat up during charging. This is normal and not

dangerous.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Siemens GigasetS 100-150 colour in the language / languages: English as an attachment in your email.

The manual is 4,74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens GigasetS 100-150 colour

Siemens GigasetS 100-150 colour User Manual - Dutch - 134 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Siemens GigasetS 100-150 colour Manual

Product: