61030
29
Zoom out
Zoom in
Previous page
1/41
Next page
29
Description of new and updated functions
Information on operating Gigaset VoIP telephones with Network Address Translation (NAT) routers
Gigaset IP Phones / IM-BELG EN / A31008-xxxx-xxxx-x-xxxx / description.fm / 3/23/09
Version 4, 29.10.2007
2. Setting port forwarding on the router
To ensure that your specified SIP and RTP port numbers are used on the WAN interface with
the public IP address, you must define port forwarding rules for the SIP and RTP ports on
the router.
To define port forwarding on the router, proceed as follows:
The terms used in the following can vary from router to router.
To forward a port, you must make the following specifications (example):
Protocol
Enter UPD as the protocol to be used.
Public port
Port number/port number range on the WAN interface
Local port
The SIP and RTP port numbers set on the telephone.
In the new firmware version for Gigaset VoIP telephones, you can set a RTP port range.
In this case, you must also define corresponding port forwarding for this range.
Local host (IP)
Local IP address of your phone in the LAN. You can see the phone's current IP address in
the handset display by pressing the paging key on the base.
To enable the router to perform this port forwarding, the DHCP settings of the router must
ensure that the telephone is always assigned the same local IP address – i.e. the DHCP does
not change the IP address assigned to the telephone during operation. Alternatively,
you can assign a fixed (static) IP address to the telephone (
£ user guide for your phone).
However, you must ensure that this IP address is not within the address range reserved for
DHCP and is not assigned to any other LAN subscriber.
Protocol Public port Local port Local host (IP)
UDP 49060 49060 192.168.2.10 for SIP
UDP 49004–49010 49004–49010 192.168.2.10 for RTP
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens Gigaset S685 IP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Gigaset S685 IP in the language / languages: English as an attachment in your email.

The manual is 0,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens Gigaset S685 IP

Siemens Gigaset S685 IP User Manual - English - 280 pages

Siemens Gigaset S685 IP User Manual - German - 202 pages

Siemens Gigaset S685 IP Additional guide - German - 43 pages

Siemens Gigaset S685 IP User Manual - German - 2 pages

Siemens Gigaset S685 IP Additional guide - Dutch - 42 pages

Siemens Gigaset S685 IP User Manual - Dutch - 287 pages

Siemens Gigaset S685 IP User Manual - Dutch - 80 pages

Siemens Gigaset S685 IP Additional guide - French - 42 pages

Siemens Gigaset S685 IP User Manual - French - 288 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info