504672
19
Zoom out
Zoom in
Previous page
1/55
Next page
Initial configuration
û
A
17
Back
Registering Gigaset M105 Data at Gigaset M101 Data
Proceed as follows:
1.
Gigaset M105 Data has been installed.
2.
If the M101 is not already in the standard factory setting, make sure that
the M101 is set to the type "Base". Take the type display and the switch-
over options from the configuration program.
3.
Press and hold down the black button on the Gigaset M101 Data (partner
station). After about 10 seconds, the LEDs flash alternately to indicate
"ready for registration".
4.
Start the
Set Gigaset
program on the PC to which the Gigaset M105 Data
is connected.
5.
Select the
Local station
registration card. The type is
Portable part
.
6.
Click the
Register
button and enter the PIN.
7.
Click
OK
. The registration procedure starts and the message "
If the re-
quired base is ready for registration, the local adapter logs on.
Check that the base is ready for registration.
" appears on the screen.
The two devices set themselves up automatically. There should now be
one entry in the
Registered bases
list.
8.
Give the local station a suitable name, e.g. "PC".
9.
Select the
Remote adapter
registration card and call the partner station,
say, "Gigaset M101 Data". In this case too, the registered subscriber is
indicated in the window.
10.
Select the
Operating mode
registration card and set the operating mode
you want. For a direct connection (PC-PC connection) set, say, the fol-
lowing parameters: Bits per second: 115200 - Data bits: 8 - Parity: None
(N) - Stop bits: 1 - Protocol: Hardware (RTS/CTS).
11.
Quit the program with
OK
.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens Gigaset M101 Data at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Gigaset M101 Data in the language / languages: English as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens Gigaset M101 Data

Siemens Gigaset M101 Data User Manual - German - 71 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info