504672
18
Zoom out
Zoom in
Previous page
1/55
Next page
Initial configuration
û
A
16
Back
Registering Gigaset M101 Data at Gigaset M101 Data
Proceed as follows:
1.
Disconnect both adapters and the PC from the power supply.
2.
Connect one Gigaset M101 Data to the PC.
3.
Connect the PC and both Gigaset M101 Data units to the power supply.
4.
Start the
Set Gigaset
program
at the PC.
5.
Press and hold down the black button on the Gigaset M101 Data (base
station)
not
connected to the PC. After approx. 10 seconds, the LEDs in-
dicate that the system is ready for registration by flashing in sequence.
6.
Select the
Local adapter
tab.
7.
Click the
Register
button.
The local adapter is now switched to
Portable part
operating mode. Nor-
mally, you must enter the base station PIN before registration is possible.
However, you can skip this step during initial configuration since the base
station has the factory-set PIN ("0000"). This is automatically set by the
program during initial configuration.
8.
Click
OK
. The registration procedure starts and the message "
If the re-
quired base is ready for registration, the local adapter logs on.
Check that the base is ready for registration.
" appears on the screen.
The two devices are automatically synchronised. An entry now appears
in the
Registered bases
list.
9.
Assign a suitable name to the local adapter, e.g. "PC".
10.
Open the
Remote adapter
tab and assign a name to it, e.g. "Modem".
The registered portable part now also appears in this window.
11.
It may be useful to switch the operating mode from "AT commands (PC)"
to one of the two other operating modes. This setting concerns the proto-
col on the serial interface, especially the speed adjustment. For more in-
formation, see
"Setting the operating mode" on page 20
.
12.
Close the program with
OK
.
In the event of errors or for further information, see
"Configuration pro-
gram options" on page 18
.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens Gigaset M101 Data at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Gigaset M101 Data in the language / languages: English as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens Gigaset M101 Data

Siemens Gigaset M101 Data User Manual - German - 71 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info