63676
13
Zoom out
Zoom in
Previous page
1/30
Next page
12
Installing the Gigaset HC450 door intercom system
Gigaset HC450 / en / A31008-M1799-R101-2-7619 / Starting.fm / 08.10.2008
Version 4, 16.09.2005
Connecting entry lighting
If you want to use the bottom doorbell key
to switch on the entry lighting, the light
source must be connected to the control
unit using two cores (see illustration
below). The entry lighting can also be
switched on/off by means of a switch con-
nected in parallel (see sketch, e.g. motion
detector). Alternatively, a sensor input
from a timing circuit can also be
connected.
Connection with the power supply unit
Connect the mains adapter with the plug
on the right-hand side of the control unit.
Slide the cover back into the main casing.
Screw the cover into place using the
casing screw (see diagram p. 10).
Insert the plug-in power supply unit into a
socket.
Caution:
The entry light may only be installed by a
qualified electrician.
Stranded conductors must not be used for the
connection and the insulation on the leads
must not be stripped by more than 6 mm. The
shrinkage tubes supplied must be pulled over
the two wires (see diagram).
Secure the connection cable with the strain
relief.
6 mm
Thermal
shrinkage
tubes
Control unit
Entry lighting
230 V mains
Actuator
Push-
button
Light
ETS
Strain
relief
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens Gigaset HC450 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Gigaset HC450 in the language / languages: English as an attachment in your email.

The manual is 0,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens Gigaset HC450

Siemens Gigaset HC450 User Manual - German - 32 pages

Siemens Gigaset HC450 User Manual - Dutch - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info