63676
11
Zoom out
Zoom in
Previous page
1/30
Next page
10
Installing the Gigaset HC450 door intercom system
Gigaset HC450 / en / A31008-M1799-R101-2-7619 / Starting.fm / 08.10.2008
Version 4, 16.09.2005
extended by means of a repeater
placed between the base station
and control unit.
u Mount the HC450 control unit at a suit-
able location along the junction wire
between the bell button and bell.
It is recommended that you mount the
unit near the bell transformer. This is
normally located in the fuse box. Any
adjustment required to the fuse box
must be undertaken by a qualified
electrician.
u To ensure that a suitable mounting
location is selected, familiarise yourself
with the location of the cabling before-
hand. Watch out for the cabling
between the bell button, the bell trans-
former and the bell. Lay the cables so
that nobody can walk on or trip over
them. Before finally mounting the
control unit, check the placement of
the unit with temporary cabling by per-
forming a function test (control unit
can register with the base station, sta-
ble operation possible with adequate
connection quality from the handset to
the HC450 door intercom).
u You should also refer to the mounting
instructions for the HC450 door inter-
com (see p. 7).
u The control unit must not be installed
in a fuse box or metal housing.
u The control unit must not be installed
near air conditioning systems, in areas
with strong sunlight or in dusty
environments.
u The control unit must be protected
from the direct influence of water
and chemicals.
u Areas with strong magnetic fields
(transformers, electric motors, high-
voltage lines) must be avoided.
u Cables must not be connected or dis-
connected or the HC450 control unit
installed during a thunderstorm.
u Watch out for electrical, water or gas
lines in the wall if mounting the control
unit on the wall.
Mounting
If necessary, loosen the screws from the
casing. Pull the cover downwards to
remove it.
Mark the positions of the two drill holes on
the wall. Drill two holes suitable for 6 mm
wall plugs. Screw the upper screw into the
wall plug and mount the casing by fixing
the upper mounting hole onto the screw.
Screw the casing into place using the
lower mounting hole.
For laying the cables, a multi-core commu-
nications cable is recommended with a
wire profile of 0.6 mm.
Button
Mounting hole
Strain relief
Casing screw
LED
Mounting hole
Clip-on cover
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens Gigaset HC450 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Gigaset HC450 in the language / languages: English as an attachment in your email.

The manual is 0,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens Gigaset HC450

Siemens Gigaset HC450 User Manual - German - 32 pages

Siemens Gigaset HC450 User Manual - Dutch - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info