504662
4
Zoom out
Zoom in
Previous page
1/8
Next page
4
en
Gi
gaset
DA
210
/N
or
di
cs en
/
A
30054-
M
6527-
R
201-1-
PG
19
/
DA
210_en.
f
m
/
16.06.2011
u Dialling a dialling pause after the
first 5 digits:
The portion of the number saved
after the pause is only dialled
after pressing the
I key.
Adjusting the telephone
Setting the handset volume
The handset volume can be set to
two levels.
F Press the handset vol-
ume control key.
The primary volume is reset after
hanging up.
Mute
You can deactivate the telephone's
microphone during a call.
C Press the mute key.
To reactivate microphone: Press the
mute key again or press any other
key.
The mute key LED flashes while the
microphone is deactivated.
Setting the ringer
You can set the ringer melody and
volume to 9 levels or turn it off
(factory default: level 6).
c K Lift the handset, press
the set key.
# Press the hash key.
Q ... O Press one of the
number keys.
(0: Ringer off until
handset is next lifted).
K Press the set key.
Note: The LED on the mute key flashes
while the telephone is in set mode.
Operation on a PABX
Special functions/Recall key
During an external call, you can
make an enquiry or forward the call.
To do this, press the recall key
H.
The subsequent procedure depends
on your PABX.
To set the recall key, the telephones
flash time must be set consistent
with your PABX. Please refer to the
operating instructions for your PABX.
Changing the dialling mode/
flash time
The telephone supports the follow-
ing dialling modes:
Depending on your PABX, you may
need to change your telephone’s
dialling mode or the flash time.
Temporary tone dialling switching
in "Pulse" position
To use functions that require tone
dialling (e.g. remote control of
answering machine), you can set the
telephone to tone dialling for the
duration of the call without adjust-
ing the switch.
After the connection is established:
* Press the star key.
After the connection is broken, the
setting reverts to pulse dialling.
T1: Tone dialling, flash time 100 ms
T2: Tone dialling, flash time 280/
600 ms
(depending on device model)
P: Pulse dialling
To so this, use the slid-
ing switch below the
keypad.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens Gigaset DA210 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Gigaset DA210 in the language / languages: English as an attachment in your email.

The manual is 0,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens Gigaset DA210

Siemens Gigaset DA210 User Manual - German - 8 pages

Siemens Gigaset DA210 User Manual - Dutch - 10 pages

Siemens Gigaset DA210 User Manual - French - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info