668967
77
Zoom out
Zoom in
Previous page
1/94
Next page
75
Building Technologies A6V10393190_c_en_--
Fire Safety
2014-05-28
9
Commissioning
Planning
Assign the field devices to the floor plan as per local regulations.
Document the panel parameters (see Appendix A).
Calculate battery standby time (see chapter 11).
Field installation
Install detection lines (detectors and manual call points) and terminate with EOL
element.
Install control (sounder) lines and terminate with EOL element.
Panel installation
Fire control panel must be mounted.
Connect all detection lines or terminate with EOL element.
Connect all control lines or terminate with EOL element.
Connect alarm and fault dialer.
Inscription stripes must be inserted for zone ind. field (optional).
Switch off the main supply fuse AC 230 V.
Connect the power cable and check the earth connection.
Switch on the main supply fuse AC 230 V.
Place and connect battery.
Fill in and place the provided label at the top, right-hand side of the housing.
Programming
Initial start-up of the panel.
Program the system and resolve the faults.
Function test
Initiate lamp test and check all LED, internal buzzer.
Test each device (Detector, MCP, etc.) individually and check the correctness of
the system behavior in terms of outputs (e.g. Sounder, Fire output, etc.).
Test fire and fault transmission.
Make sure that the panel is in normal operation, the buzzer and all system parts are
enabled.
The system can now be handed over to the customer.
Warning Pay attention to external voltage (AC 230 V)!
77


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens FC123-ZA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens FC123-ZA in the language / languages: English as an attachment in your email.

The manual is 3,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info