668967
59
Zoom out
Zoom in
Previous page
1/94
Next page
57
7 Programming
For programming, access level 3 is required.
All outputs are automatically isolated during programming mode.
All disabled outputs are automatically enabled if access level 2 is reached.
7.1
Configure
7.1.1
Zone
Configure parameter for each zone.
Select a zone for programming.
Standard
Automatic detectors
and manual call
points can be mixed
within the same
zone.
Device could be
either conventional
or collective.
AVC option
'1', '2'
Mixed MCP & det.
AVC option
'1', '2', '3'
GB continuity
If detectors are removed, the
zone will work properly.
Short = alarm
Any short is detected as 'Fire
Alarm'.
Direct
'1'
No delay, immediate alarm.
Via V1 / V2
'2' Delayed alarm. V1: reaction time, 3 min.
V2: investigation time, 5 min.
(Change value, see
chapter 7.2.10).
Via AVC timer
MCP direct
'3'
- Delayed alarm for automatic
detectors.
- No delay for MCPs.
If selected, the 'Alarm' state is achieved, if the second device activation in the same zone
occurs within 90 seconds. The first device activation is inhibited from the zone and
automatically reset after a defined time, (default value: 15 second, see chapter 7.2.5).
If selected, the 'Alarm' state is achieved, if the second corresponding zone is in 'Alarm' as well.
The zone pairs (1&2, 3&4, 5&6, etc) are predefined in the system,
e.g. if zone 6 is selected, zone 5 is automatically linked as well and vice versa.
Name the zone, see chapter 7.5.
Customer
text
Zone
coincidence
*Device
coincidence
AVC
Mode
Zone 1..n
Zone
Accessory
card(s)
Input Output Zone
Configure
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens FC123-ZA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens FC123-ZA in the language / languages: English as an attachment in your email.

The manual is 3,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info