788189
48
Zoom out
Zoom in
Previous page
1/52
Next page
en Trouble shooting
48
Demo mode
If the ± symbol is shown on the display, demo mode
is active. The appliance does not heat up in demo
mode. Disconnect the appliance from the power
supply.Wait a few seconds before reconnecting the
appliance. Then deactivate demo mode in the basic
settings within 3 minutes of switching on the appliance.
The cooking sensor indicator will not light up and the cooking
sensor is not responding.
Replace the 3 V CR2032 battery. See the section entitled ~ "Changing the
battery"
If this does not solve the problem, press and hold the symbol on the cooking sen-
sor for 8-10 seconds and then reconnect the cooking sensor to the hob. See the
section entitled ~ "Connecting the wireless temperature sensor to the control
panel"
If the problem persists, contact our technical after-sales service.
The indicator on the sensor flashes twice. The battery in the cook-
ing sensor is almost flat. You may be interrupted the next time you
cook by the battery running out.
Replace the 3 V CR2032 battery. See the section entitled ~ "Changing the
battery"
The indicator on the sensor flashes three times. The connection
to the cooking sensor has been broken.
Press and hold the symbol on the cooking sensor for 8-10 seconds and then
reconnect the cooking sensor to the hob. See the section entitled ~ "Connecting
the wireless temperature sensor to the control panel"
The hob is unable to connect to your home network or the extrac-
tor hood. E7010
Switch the hob off and then on again.
If the message appears again, contact our technical after-sales service.
The operating voltage is incorrect and outside of the normal oper-
ating range. E9000/E9010
Contact your electricity supplier.
The hob is not connected correctly U400 Disconnect the hob from the mains. Make sure that you have connected the hob
as shown in the circuit diagram.
Problem Solution
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens EZ877KZY1E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens EZ877KZY1E in the language / languages: English as an attachment in your email.

The manual is 4.77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens EZ877KZY1E

Siemens EZ877KZY1E User Manual - German - 52 pages

Siemens EZ877KZY1E User Manual - Dutch - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info