788219
18
Zoom out
Zoom in
Previous page
1/28
Next page
en HomeConnect
18
Setting Selection or display Additional information
⁠ ⁠ ⁠ Connection to app
⁠ – Not connected
⁠ – Connect
⁠ ⁠ ⁠ is only displayed if the hob is connected to the
home network.
⁠ ⁠ ⁠ Connection to the Wi-Fi
⁠ – Wireless module switched off
⁠ – Wireless module switched on
If Wi-Fi has been activated, you can use the HomeCon-
nect functions.
⁠ ⁠ ⁠ is only displayed if the hob has been previously
connected to a network.
⁠ ⁠ ⁠ Set using the app
⁠ – Switched off
⁠ – Switched on1
If ⁠ ⁠ ⁠ is switched off, only the hob's operating statuses
are displayed in the HomeConnect app.
⁠ ⁠ ⁠ Software update
⁠ – Update available and ready to in-
stall
⁠ – Start installation
⁠ ⁠ ⁠ is only displayed if a software update is available.
⁠ ⁠ ⁠ Controlling remote access by after-
sales service
⁠ – Not authorised
⁠ – Authorised
⁠ ⁠ ⁠ is only displayed if after-sales service is attempting
to connect to the hob. After granting access, you can ter-
minate this at any time.
⁠ ⁠ ⁠ Display Wi-Fi signal strength
⁠ – Not connected to the WLAN home
network (Wi-Fi)
⁠ – Signal strength 1 (poor)
⁠ – Signal strength 2 (moderate)
⁠ – Signal strength 3 (good)
⁠ ⁠ ⁠ is only displayed if there is a connection to the
WLAN home network (Wi-Fi).
⁠ ⁠ ⁠ Connection to HomeConnect server
⁠ – Not connected
⁠ – Connected
⁠ ⁠ ⁠ is only displayed if there is a connection to the
WLAN home network (Wi-Fi).
1Factory setting
21.3 Changing settings via the
HomeConnect app
You can use the HomeConnect app to change the set-
tings for the cooking zones and send them to the hob.
Requirements
¡The hob is connected to the Wi-Fi and to the
HomeConnect app.
¡To use the HomeConnect app to set the hob, ⁠ ⁠ ⁠
must be switched on in the basic settings. ⁠ ⁠ ⁠ is
switched on on delivery. If the option for the trans-
mission of settings has been deactivated, only the
hob's operating statuses are displayed in the
HomeConnect app.
1. Select the setting in the HomeConnect app and
send it to the hob.
Follow the instructions in the HomeConnect app.
Settings that you send from the HomeConnect app
to the hob must be confirmed on the hob.
aAs soon as cooking settings are transmitted to a
cooking zone, the display starts to flash, depending
on the setting.
2. To confirm the setting, touch the hotplate display for
the required cooking zone.
3. To discard the setting, touch any other touch field
on the hob.
21.4 Software update
Your appliance's software can be updated using the
software update function, e.g. for the purposes of op-
timisation, troubleshooting or security updates.
To do this, you must be a registered HomeCon-
nectuser, have installed the app on your mobile device
and be connected to the HomeConnectserver.
As soon as a software update is available, you will be
informed via the HomeConnectapp and will be able to
start the software update via the app. Once the update
has been successfully downloaded, you can start in-
stalling it via the HomeConnectapp if you are in your
WLAN home network (Wi-Fi). The HomeConnectapp
will inform you once installation is successful.
Notes
¡You can continue to use your appliance as normal
while updates are downloading. Depending on your
personal settings in the app, software updates can
also be set to download automatically.
¡We recommend that you install security updates as
soon as possible.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens EX877NVV6E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens EX877NVV6E in the language / languages: English as an attachment in your email.

The manual is 1.43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens EX877NVV6E

Siemens EX877NVV6E User Manual - German - 28 pages

Siemens EX877NVV6E User Manual - Dutch - 28 pages

Siemens EX877NVV6E User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info