788219
16
Zoom out
Zoom in
Previous page
1/28
Next page
en Cookware test
16
Display Setting Value
⁠ ⁠ Power limitation
Enables the total power of the hob to be lim-
ited, if necessary, based on the conditions of
your electrical installation. The available set-
tings depend on the maximum power of the
hob. You can find precise information on the
rating plate. If the function is active and the
hob has reached the set power limit, ⁠ is dis-
played and you cannot select a higher power
level.
⁠ - Switched off. Maximum power of the hob 1.
⁠ - 1000 W. Lowest power setting.
⁠. - 1500 W.
...
⁠ - 3000 W. Recommended for 13 A.
⁠. - 3500 W. Recommended for 16 A.
⁠ - 4000 W.
⁠. - 4500 W. Recommended for 20 A.
...
⁠ - Maximum power of the hob.
⁠ ⁠ ⁠ powerMove Plus
Allows you to change the preset power levels
for the three cooking areas of the flexible
cooking zone.
Select one of the two cooking zones, set the
required power level in the settings area and
touch ⁠ to confirm the new power level.
⁠ - Preset power level for the front cooking zone.
⁠ - Preset power level for the middle cooking zone.
⁠. ⁠ - Preset power level for the rear cooking zone.
⁠ ⁠ ⁠ Cookware test
You can use this function to test the quality
of the cookware.
⁠ - Not suitable.
⁠ - Not optimal.
⁠ - Suitable.
⁠ ⁠ ⁠ flexInduction
Change the switch-on mode for the Flex
Zone.
⁠ - As two independent cooking zones.
⁠ - As a connected cooking zone.1
⁠ ⁠ Restoring factory settings ⁠ - Individual settings 1.
⁠ - Factory settings.
1Factory setting
19.2 To go to the basic settings
Requirement:The hob must be switched off.
1. To switch on the hob, touch ⁠.
2. Within the next 10 seconds, press and hold ⁠ for 4
seconds.
Product information Display
Directory for the technical after-sales
service (TK)
⁠ ⁠
Production number ⁠ ⁠
Production number 1 ⁠ ⁠.
Production number 2 ⁠. ⁠
aThe first four displays provide the product informa-
tion. To call up the individual displays, touch the
control panel.
3. Touch ⁠ to access the basic settings.
a⁠ ⁠ and ⁠ light up as a presetting.
4. Touch ⁠ repeatedly until the desired setting ap-
pears.
5. Select the required setting in the settings area.
6. Touch and hold ⁠ for 4seconds.
aThe settings are saved.
19.3 Discarding changes to the basic
settings
Touch ⁠.
aAll changes are discarded and not saved.
20  Cookware test
The quality of the cookware has a major influence on
the speed and the result of the cooking process.
You can use this function to test the quality of the cook-
ware.
Before the test, ensure that the size of the cookware
base corresponds to the size of the cooking zone be-
ing used.
Access is via the basic settings. →Page15
20.1 Carrying out Cookware test
As a single cooking zone, the flexible cooking zone is
set in such a way that only the individual item of cook-
ware is checked.
1. At room temperature, place the cookware with ap-
prox.200ml water in the centre of the cooking zone
that best fits the base of the cookware in terms of
size.
2. Call up the basic settings and select ⁠ ⁠ ⁠.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens EX877NVV6E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens EX877NVV6E in the language / languages: English as an attachment in your email.

The manual is 1.43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens EX877NVV6E

Siemens EX877NVV6E User Manual - German - 28 pages

Siemens EX877NVV6E User Manual - Dutch - 28 pages

Siemens EX877NVV6E User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info