68050

Siemens Euroset 5030 Manual

8
Zoom out
Zoom in
Previous page
1/16
Next page
gigaset 5030 / IM eng-fra / A30350-M207-A801-4-5819 / 5030_en.fm / 9.10.09
8
GB
Using Calling Line Identification
Under the following conditions, the phone numbers of
incoming calls are
(a) shown on the display (up to the first 32 digits) and
(b) automatically saved in a calls list:
◆ Both your network provider and the caller's network
provider must offer Calling Line Identification.
◆ Both you and the caller must have requested this service
(if necessary) from your respective network providers.
If these conditions are met, but a caller has suppressed
Calling Line Identification before making the call, you will
see "Private" or "Out of Area" on the display instead of the
(flashing) phone number.
Up to 16 digits can be shown on the display. Longer
telephone numbers will be shortened from the end of the
number.
If the phone number is stored in the directory, the assigned
name will be displayed instead of the phone number.
Picking up a waiting call
If you receive a call during another call, you will hear the
call waiting tone in the handset. If the phone number is
transmitted, it (or the corresponding directory entry,
if available) will appear on the display.
You can switch back and forth between the current call and
the waiting call using the key sequence
>2. Depend-
ing on your network provider this key sequence may vary. In
doubt, contact your network provider
Calls list
The calls list includes up to 50 entries. If a subscriber calls
several times,
› appears in the display.
Sequence of list entries: The most recent call is displayed
in the first position (position number "01"). Older entries are
moved downwards with each new incoming phone number
until they are deleted from the list.
In the calls list, you can
◆ scroll through the phone numbers displayed
◆ delete entries
◆ Save phone numbers from the calls list to a repertory key
or in the Directory (see page 4)
◆ dial a displayed phone number directly.
Viewing caller histories and dialling phone numbers
If there are entries in the calls list that have you have not
yet seen,
| flashes in the display. The number of list
entries which have not been viewed yet is displayed.
A Press the Down key.
Scroll through the calls list:
A...C Press the Down/Up key.
Dial the phone number:
B At the selected entry, press the OK key.
AB In the menu, select Call Back. Press the OK key.
After 2 seconds the number is dialled.
Lift the handset if you want to talk via the
handset.
Deleting entries in the calls list
Delete individual entries
A...C Scroll through the calls list to the desired entry.
B Press the OK key.
AB In the menu, select Delete. Press the OK key.
Delete all entries at the same time
B In the calls list, press the OK key.
AB In the menu, select Delete All.
Press the OK key.
The calls list is closed.
Activating/deactivating display of the prefix
You can set the telephone so that the prefix is not displayed
for incoming calls. This can be useful, for example, if you
cannot see the last digits of a long phone number on the
display.
You can deactivate the display for one area code (up to 6
digits).
F ¢ SMS/CLIP Setup ¢ Area Code
Entering the prefix:
o Enter a one to six-digit prefix (without the
enquiry call key).
Deleting the prefix:
>...> You can delete the emergency number one
character at a time using the R-key
B Press the OK key.
Activating/deactivating the display of incoming
phone numbers during a call
The CLIP display of incoming phone numbers during a call
can be activated or deactivated.
F ¢ SMS/CLIP Setup ¢ CLI on CW
AB In the menu, select Disable or Enable.
Press the OK key.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens Euroset 5030 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Euroset 5030 in the language / languages: English as an attachment in your email.

The manual is 0,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info