68050
6
Zoom out
Zoom in
Previous page
1/16
Next page
gigaset 5030 / IM eng-fra / A30350-M207-A801-4-5819 / 5030_en.fm / 9.10.09
6
GB
Changing the PIN
You need a PIN to lock and unlock the telephone and to turn
off the baby call function.
F ¢ Security
oB Enter the PIN (default setting: 0000), press the
OK key.
A...C In the menu, select Change PIN.
B Press the OK key.
oB Enter the old PIN (default setting: 0000),
press the OK key.
oB Enter the new PIN, press the OK key.
oB Re-enter the new PIN, press the OK key.
Activating/deactivating direct call (baby call)
If a phone number is set for the baby call function, it is
dialled automatically when you press any key (except
F
and
L). The telephone does not allow other phone
numbers to be dialled, but incoming calls can be received.
When the direct call function and the telephone lock are
turned on, you will see the set phone number and
è in the
display.
F ¢ Security
oB Enter the PIN (default setting: 0000), press the
OK key.
A...C In the menu, select Direct Call.
B Press the OK key.
o Enter the direct call number (up to 32 digits).
B Press the OK key.
Switching off
F Press the menu key.
o Enter the PIN (default setting: 0000)
BB Press the OK key twice.
Saving/deleting an emergency number
A saved emergency number ca also be dialled when the
telephone is locked.
F ¢ Security
oB Enter the PIN (default setting: 0000), press the
OK key.
A...C In the menu, select EmergencyCall.
B Press the OK key.
Saving
o Enter the emergency number (up to 32 digits).
Deleting
Once an emergency number is saved, it will
appear in the display.
>...> You can delete the emergency number one
character at a time using the R-key.
B Press the OK key.
Activating/deactivating the telephone lock
The telephone can be locked so that it cannot dial any
phone numbers, including the direct call number. Only a set
emergency number can be dialled. You can continue to
receive incoming calls.
When the telephone is locked, you will see
{ in the
display.
Activating the telephone lock
F ¢ Security
oB Enter the PIN (default setting: 0000), press the
OK key.
A...C Select Key Lock in the menu.
B Press the OK key.
Deactivating the telephone lock
F Press the Menu key.
o Enter the PIN (default setting: 0000).
B Press the OK key.
Activating/deactivating call duration display
The telephone can show the approximate call duration
in the display (up to 99 min. 59 sec.). If the call duration
display is activated, the time display begins 8 seconds after
the last digit is dialled.
cF18#
Lift handset, initiate function.
0/ 1 0: deactivate; 1: activate.
Ba Press the OK key. Replace handset.
Restoring the telephone to the factory settings
You can restore the telephone's default settings.
cF125
Lift handset, initiate function.
0...3 0: Restore all
settings (see page 15);
1: Restore only the repertory keys;
2: Delete only external line prefixes;
3: Restore only the network services.
Ba Press the OK key. Replace handset.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens Euroset 5030 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Euroset 5030 in the language / languages: English as an attachment in your email.

The manual is 0,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info