332599
13
Zoom out
Zoom in
Previous page
1/86
Next page
Home troubleshooting
You do not always need to call the technical assistance service.
Very often, you can solve the problem on your own. The
following table contains a few pieces of advice.
Important note:
Only authorised personnel from our Technical Services
Department can carry out work on the gas and electrical supply
systems.
Problem Probable cause Solution
11
- The automatic safety
switch has tripped or
a fuse has blown.
- Check the fuse in the main
fuse box and change it if it is
damaged.
The general electrical
system is
malfunctioning
- Defective fuse.
- Check the main fuse box to
see whether the automatic
trip switch or a differential
switch has tripped.
The electric sparker
does not work
- There is waste from food
or cleaning products
between the ignition
sparker and the burner.
- The burner covers are
not located correctly.
- The burners are wet.
- The space between the
ignition sparker and the
burner must be carefully
cleaned.
- Make sure that the burner
covers are correctly located.
- Dry the burner covers
carefully.
The flames on the
burners are not uniform
- The different parts of the
burner have been
improperly assembled.
- The grooves on the
burners' gas outlets are
dirty.
- Place the different pieces
correctly.
- Clean the grooves on the
burners' gas outlets.
The gas flow does not
appear to be normal or
no gas comes out
- The gas mains are
turned off.
- If gas is supplied from a
gas bottle, it may be
empty.
- Replace the gas bottle with
a full one.
- Turn on all stop cocks.
There is a smell of gas
in the kitchen area
- There may be a leak from the
coupling to the gas bottle.
- A gas tap has been left on.
- Check to see if any gas taps
are on.
- Check that the coupling is
correct.
The safety devices on
the different burners
don't work
- The grooves on the
burners' gas outlets are
dirty.
- The control knob was
not held down long
enough.
- Clean the grooves on the
burners' gas outlets.
- Once the burner is lit, hold
the control knob down a few
seconds longer.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens er 947501 inox at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens er 947501 inox in the language / languages: English, German, Dutch, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 4,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info