610506
31
Zoom out
Zoom in
Previous page
1/200
Next page
Service programmes en
31
Rinse milk system
The milk system is automatically
cleaned with a short jet of steam directly
after preparing a milk drink.
For particularly thorough cleaning, the
milk system can be additionally rinsed
with water.
Duration: approx. 2 minutes
1. Press the $/± button to open the
menu.
2. Use the rotary selector to select
"Rinse milk system".
3. Press the rotary selector to start the
programme.
4. Empty, clean and re-connect the milk
container.
5. Place an empty glass under the
outlet system and confirm.
The programme runs.
6. Empty, clean and re-connect the milk
container.
7. Empty the glass.
The programme has finished. The
appliance is ready for use again.
8. Press the $/± button to exit the
programme.
The milk system should also be subject
to thorough manual cleaning at regular
intervals. ~ "Cleaning the milk system"
on page 28
Descaling
Duration: approx. 21 minutes
The line at the bottom of the display
indicates in how many minutes the
water tank will need to be rinsed and
refilled with water, for example.
1. Press the $/± button to open the
menu.
2. Use the rotary selector to select
"Descale".
3. Press the rotary selector to start the
programme.
The instructions in the display guide you
through the programme.
4. Empty the drip tray and re-insert.
5. Empty, clean and re-connect the milk
container.
6. Remove the water filter (if present)
and confirm.
7. Fill the empty water tank with
lukewarm water up to the marking
"0.5 l". Release one descaling
tablet TZ80002 in the water.
8. Place a container with a capacity of
1.0 l under the outlet system and
confirm.
9. Press the rotary selector.
The programme runs.
Duration: approx. 19 minutes
Info: If there is not enough descaling
solution in the water tank, you will be
asked to: Refill with still water and
confirm.
10. Rinse out the water tank and (if
removed) re-insert the water filter.
11. Pour in fresh still water up to the
"max" marking and re-insert the
water tank.
The programme runs.
Duration: approx. 2 minutes
12. Empty the container and confirm.
13. Empty the drip tray and re-insert.
14. Empty, clean and re-connect the milk
container.
The programme has finished. The
appliance is ready for use again.
15. Press the $/± button to exit the
programme.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens EQ9 - TI905201RW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens EQ9 - TI905201RW in the language / languages: English, Dutch, French, Polish as an attachment in your email.

The manual is 5,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info