Manual Siemens DH40018M (page 8 of 76) (English, German, Dutch, French, Polish, Portuguese, Spanish)

652242

Zoom out

Zoom in

1/76

Safety information

This appliance is intended for domestic use

and the household environment only.

■ Install and operate the appliance as de-

scribed in the text and illustrations. We do

not accept liability for damage resulting

from failure to heed these instructions.

■ This appliance is intended for use up to an

altitude of 2000 m above sea level.

■ The appliance may only be installed and

stored in a frost-free room (due to residual

water).

Risk of electric shock!

Switch off the mains voltage supply

immediately if a fault occurs.

Immediately shut off the cold water

supply to the appliance should it leak.

■ The continuous-ﬂow heater may only be

connected and put into operation by a

qualiﬁed professional.

■ In order to avoid potential sources of

danger, repairs and maintenance may

only be undertaken by a suitably quali-

ﬁed specialist.

■ Never open the appliance without discon-

necting the power supply beforehand.

■ The statutory regulations of the respective

country, as well as those of the local electric-

ity and water suppliers, must be adhered to.

■ The continuous-ﬂow heater is a Class I

appliance and must be connected to the

protective earth.

■ The appliance must be permanently

connected to installed pipes. The conduc-

tor cross-section must comply with the

installed appliance power.

■ Caution: Earthed water pipes may give the

appearance of a connected protective earth.

■ To guarantee compliance to relevant safety

regulations, an all-pole separator must

be ﬁtted during installation. The contact

opening must be at least 3

mm.

■ The continuous-ﬂow heater is only suitable

for closed (pressurised) operation.

■ The tap and outlet ﬁttings must be ap-

proved for operation with closed (pressur-

ised) continuous-ﬂow heater systems.

■ Only connect the continuous-ﬂow heater

to a cold water line.

■ The continuous-ﬂow heater is suitable for

connection to DVGW-tested plastic pipes.

■ Disconnect the electrical connection

cable from the supply and shut off the

water supply before connecting the

appliance!

■ Connect the water supply and then

connect the electrical supply.

■ Only make the openings which are re-

quired for installation on the rear of the

appliance. If the appliance is reinstalled,

the unused openings must be provided

with watertight sealing.

■ Do not touch electrically live parts after

installation.

■ The appliance should be disconnected

from the electrical mains supply when

working on the water supply. After service

work is complete, proceed as during the

ﬁrst-time appliance start-up.

■ No changes may be made to the appliance.

■ The appliance may only be used for heat-

ing drinking water for household use.

■ This appliance can be used by children

aged 8 years and older as well as by per-

sons with diminished bodily, sensory or

mental perception, or those who lack

knowledge or experience, if they are moni-

tored or have received instruction concern-

ing use and comprehend the possible dan-

gers that can result. Children may not play

with the appliance. Cleaning and mainte-

nance by the user may not be performed

by unsupervised children.

■ Keep children away from the appliance.

■ Please monitor children to ensure that they

do not play with the appliance.

■ The mixer and the warm water pipe may

be hot. Please inform and instruct children

appropriately.

■ Do not use aggressive or abrasive cleaning

detergents!

■ Do not use a steam cleaner.

■ The appliance is only to be descaled by a

suitably qualiﬁed specialist.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Siemens DH40018M in the language / languages: English, German, Dutch, French, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 4,06 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Siemens DH40018M Manual

Product: