555852
7
Zoom out
Zoom in
Previous page
1/8
Next page
7/8
Siemens Building Technologies Installation guide CA2Z3884en
Building Automation 08.2001
6 Relay outputs
The volt-free relay outputs are used for fan control. The following applies to the cables:
- Note the maximum rating of the relay contacts (refer to the data sheet of the room
controller concerned)
- The sizing and routing of cables depends on the connected load and the local
installation regulations.
- Fuse ratings depend on the room controller used. Please refer to the relevant
controller data sheet.
- The cables must be secured with cable restraints.
The RXA22.1 controller has an additional relay contact (Q44) for switch control of an
electric heating coil. Note the following for this relay contact:
- The maximum resistive load is 1.8 kW. Loads above this value cause excessive
wear of the contact in the case of PWM operation
- An external fuse of max. 10 A must be provided to protect the pcb tracks in the
controller.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens DESIGO RXA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens DESIGO RXA in the language / languages: English as an attachment in your email.

The manual is 0,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info