521718
6
Zoom out
Zoom in
Previous page
1/20
Next page
CM2N3204E / 1.1999 Siemens Building Technologies
6/20 Landis & Staefa Division
T Temperature in the hot water heating coil’s circuit, or air temperature just after the heating coil
Q Load
Y Manipulated variable
Y10 Control command «Heating valve»
Q13/Q14 Relay output «Hot water circulator or electric air heater battery»
Q33/Q34 Relay output «Fan speed I»
Q33/Q44 Relay output «Fan speed II»
X
pd
P-band «Frost protection controller» (data point 18)
X
pn
P-band «Standby controller» (data point 19)
w
w
Frost alarm value (data point 16)
w
wn
Setpoint «Standby controller» (data point 17)
t
Pmin
Min. running time of hot water circulator (data point 48)
The startup mode is only used with the heating sequence Y30 with operating action «/»
(plants using recirculated air dampers). On plant startup, supply air temperature control
or one of the two cascade control modes is activated.
The period of time for startup mode can be set from 0 s to 60 min. During this time, the
cooling sequence (Y20) is disabled and the hot water circulator (Y10) is activated. The
plant operates with 100 % recirculated air (prepurging).
In the case of plants that use outside detectors, this function becomes active only at
outside temperatures below 15 °C.
In the case of plant startups initiated by «Unoccupied heating mode», «Unoccupied
cooling mode» or «Night purging», this function remains inactive.
Plant operation can be controlled from the following locations:
manual switch (operating level 1: buttons 1 to 4), communication (FLN bus), «External
switch» (E7, E8), «Extended operation» (E7, E8), time switch program, «Demand con-
trolled ventilation», «Unoccupied heating mode», «Unoccupied cooling mode», night
purging, fault, commissioning.
From an external switch:
the functions of the manual switch on the RWI65.02 (operating level 1, buttons 1 to 4)
can be provided by a 4-step rotary switch with two levels.
By the function «Extended operation»:
when a pulse (of at least 3 s) is fed to E7, the plant will be operated at fan speed I;
when a pulse (of at least 3 s) is fed to E8, the plant will be operated at fan speed II.
Time switch program:
the time switch integrated in the RWI65.02 facilitates the setting of four switching
times per day; each switching time can be assigned a fan switch position (off, speed I,
or speed II) and a setpoint pair (Economy and Comfort); the settings are made on op-
erating level 3.
Summer-/wintertime changeover
Function diagrams
100 100
Y [ % ]
00
TQ
w
w
X
Pd
Q33/Q34
Q33/Q44
Q13/Q14
Y10(P) Y10(PI)
Q13/Q14
2 K
100
0
T
Y10(P)
Q13/Q14
X
Pn
2K
w
wn
w
w
½ X
Pd
t
Pmin
Y [ % ] Y [ % ]
t
Pmin
t
Pmin
On the air
and the water side
Plant ON Plant OFF
On the air
and the water side
On the air side
(DtPnt 16)
(DtPnt 18)
(DtPnt 17) (DtPnt 16)
(DtPnt 48) (DtPnt 48) (DtPnt 48)
3204D05E
Legend
Startup mode
Control
Switching the plant via
control inputs E7 and E8
Time switch
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens AEROGYR RWI65.02 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens AEROGYR RWI65.02 in the language / languages: English as an attachment in your email.

The manual is 0,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens AEROGYR RWI65.02

Siemens AEROGYR RWI65.02 User Manual - German - 50 pages

Siemens AEROGYR RWI65.02 Usermanual and installation guide - Dutch - 73 pages

Siemens AEROGYR RWI65.02 User Manual - French - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info