99293
61
Zoom out
Zoom in
Previous page
1/92
Next page
61
Gigaset 4070/4075isdn, Domestic, A31008-G3070-B001-53-
Geraete.fm
5.7.01
Step
by
Step
Registering cordless Gigaset 1000TAE
The cordless Gigaset 1000TAE allows analog terminals e.g. telephones, fax
machines or answering machines to be operated cordlessly from your base
station.
The base station system PIN must be set to 0000 before the device is put
into operation, see Change system PIN see page 55.
Press the green illuminated key on the base station.
Prepare the 1000TAE for registration (see the Gigaset 1000 TAE operating
instructions).
A connection is setup between the base station and the TAE. The 1000TAE is
assigned the lowest available internal number. An available internal number
cannot be selected via the1000TAE.
Setting the device type for cordless TAE
When operating a cordless TAE on Gigaset 4070/4075isdn, you must define
the type of the connected device. Setting for:
O
Telephone = telephone
O
Fax = fax, see INFO below
O
Modem = modem
O
Answering mach. = answering machine (required for AM pickup)
O
Neutral = combined device
The default setting is Tel ephon e.
Press

or *for selection menus.
Select using [
] and [OK]:
Service Set up
or
Base Set up
o
Settings
o
Set up
user
o
Set up device
.
This opens a list of internal numbers. Using [
] and [OK] select the internal
number of the registered cordless TAE.
Press [
9
] and select using [
] and [OK]:
Device select.
Using [
] and [OK] select the desired device type,
'
in front of the menu
command = selected.
Fax machines:
To ensure that the fax machine can interpret the internal dial
tone, it should be installed behind the PABX. Please refer to the operating
instructions for your fax machine.
If you encounter difficulties when connecting to other fax machines, e.g.
incorrect ID set at the ISDN remote station, then change the device type to
Neutral.
Combined fax machines:
As these machines also include a telephony feature,
they must be set to Neutral and installed behind the PABX.
Registering the Gigaset M101 Data and M105 Data modules
(optional)
Gigaset M101 Data with its V24 interface and Gigaset M105 Data with its USB
interface enable cordless PC connection to the base station, e.g. for Internet
access.
O
For setting up see the chapter entitled Operating Gigaset talk&surf with a
cordless data module in the installation instructions.
1.
2.
1.
2.
3.
3.
4.
Info
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens 4170 isdn at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens 4170 isdn in the language / languages: English as an attachment in your email.

The manual is 2,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens 4170 isdn

Siemens 4170 isdn User Manual - German - 116 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info