99293
60
Zoom out
Zoom in
Previous page
1/92
Next page
60
Gigaset 4070/4075isdn, Domestic, A31008-G3070-B001-53-
Geraete.fm
5.7.01
Step
by
Step
Operation with other devices
For information on operation and call number assignment, please refer to
Registering other devices on page 18.
Registering a Gigaset 3000 Classic handset
z{~
<Base No.> [OK]<System Code>[OK] <Press green illuminated key
on base station>, <INT No.>
Registering the Gigaset 2000S handset
Handset
0
(off), press <Base No.> and
0
(on) simultaneously,
System Code
<press green illuminated key on base station> (smallest free internal
number is assigned automatically by the base station).
Analogue terminal
The connection for a normal analogue terminal (such as a modem) must be set
up before this terminal can be put into service (see Setting the device type see
page 22).
Registering third-party GAP handsets
Press the green illuminated key on the base station.
Prepare the GAP handset for registration (see the handset operating
instructions). A connection is setup between the base station and the GAP
handset. The GAP handset is assigned the lowest available internal number. An
available internal number cannot be selected via the GAP handset.
The display depends on the GAP handset used, as the base station does not
send display information to GAP handsets.
Activating and deactivating the repeater capability
The Gigaset repeater allows you to increase the range of your handset. Your
Gigaset 4070/4075isdn is set up to use a Gigaset repeater (as an accessory).
This function allows you to activate and deactivate the repeater capability.
Further information can be found in the operating instructions for the Gigaset
repeater.
Press

or
*
for selection menus.
Select using [
] and [OK]:
Service Set up
or
Base Set up
o
Settings
o
System
settings
o
Spec. function
o
Repeater
.
Set using [OK]:
'
before the menu command = ON / no = OFF
7RDFWLYDWHSUHVV
[NEXT]
7KHKDQGVHWLVWKHQWHPSRUDULO\GLVDEOHG7RVZLWFK
EDFNSUHVV
[BACK]
1.
2.
Info
1.
2.
3.
4.
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens 4170 isdn at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens 4170 isdn in the language / languages: English as an attachment in your email.

The manual is 2,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens 4170 isdn

Siemens 4170 isdn User Manual - German - 116 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info